Energeeks EG-AL004 Manual De Usuario página 11

EG-AL004
Switching
Short press SET button once, when
1
the host beeps once and the LED light
flashes once, the host enters Mode 1
Short press SET button twice, when
2
the host beeps twice and the LED light
flashes twice, the host enters Mode 2
Short press SET button three times,
3
when the host beeps three times and the
LED light flashes three times, the host
enters Mode 3
Note:
After batteries are pulled out or the power is off, the host will automati-
cally revert to its original state settings. (original state settings include
high sensitivity mode and vibration alarm which is set as the alarm tone).
Main alarm arming
When the main alarm is booting or switching the sensitivity, the main alarm
must be waited for 5s to arm and detect vibration;
After alarming, the main alarm must be waited 5s to detect vibration again.
If the main alarm is in low battery condition, the time of alarm will shorten when
using vibration alarm; as the battery is gradually running out,it must be replaced
until the main alarm is unable to alarm, otherwise the host will not work.
11
Sensitivity Muting
High
When the host
alarms, short
Middle
press SET button
to mute the alarm
immediately
Low