Publicidad
Idiomas disponibles
Idiomas disponibles
Fig. 2
25
24
26
13
24 Head Assembly is the part of the saw that
includes the blade, guards, motor, main
handle, and dust collection system.
25 Arbor Lock, when pressed, keeps the
blade from rotating. It's used during blade
removal or installation, when loosening or
tightening the arbor bolt.
26 Base provides the working surface that
supports the workpiece.sw
27 Mounting Holes for Optional Crown Stop.
28 -2° Bevel Undercut Feature Screw secures
the -2° undercut feature plate.
29 -2° Bevel Undercut Feature allows for -2°
right bevel undercuts.
30 Bevel Lock Knob locks the head assembly
at the desired bevel angle.
16099221PK GCM18V-07S OSI 20220506.indd 12
Getting to Know Your Miter Saw
35
10
33
34
29
28
12
27
31 Slide System allows the head assembly to
smoothly slide in and out. It can be locked
all the way to the rear or in the fully-ex-
tended position.
32 Dust Bag collects the dust from sawing
operations. To empty it, uncouple it from
the dust port and open the zipper at the
bottom.
33 Slide Rail Lock Knob when tightened,
locks the slide system in place. Tighten by
turning the knob clockwise (to the right),
and loosen my turning counterclockwise
(to the left).
34 Pivot Post provides support for and is the
pivot point for the head assembly.
35 Head Assembly Lock Pin is used to lock
the head assembly in the lower position.
-12-
32
31
7
8
30
10
5/6/22 11:27 AM
Publicidad
