Publicidad
Idiomas disponibles
Idiomas disponibles
To avoid possible injury, disconnect battery pack before performing any as-
sembly, adjustments or repairs.
Storing the Torx Wrench
There is a storage location on the saw to store
the Torx wrench (Fig. 7, 39). Insert the short leg
of the Torx wrench through the rubber grommet
as shown. Place the long leg into the tool rest.
NOTE: The
Torx wrench (39) is needed to
change the blade. If lost, use a Torx 30 wrench
or a key.
Fig. 7
39
16099221PK GCM18V-07S OSI 20220506.indd 18
Assembly
Inserting and Releasing Battery Pack
Slide charged battery pack (Fig. 8, 42) into the
battery bay (37) until the battery pack locks into
position.
Fig. 8
42
Your tool is equipped with a secondary locking
latch to prevent the battery pack from com-
pletely falling out of the battery bay, should it
become loose due to vibration.
To remove the battery pack, press the battery
pack release button (36) and slide the battery
pack completely out of the battery bay.
-18-
36
37
35
5/6/22 11:27 AM
Publicidad
