Hilti NURON SF 4-22 Manual De Instrucciones página 36

Status
All LEDs show in sequence, fol-
lowed by one (1) LED showing con-
stantly red.
3.5 ATC
The product is equipped with the ATC (Active Torque Control) quick-acting
electronic cut-out.
If the accessory tool sticks or stalls, the product will suddenly pivot about
its own axis in the opposite direction. ATC detects this sudden pivoting
movement of the product and switches the product off immediately.
For ATC to function correctly, the product must be free to pivot.
After an ATC cut-out, switch the product off and then on again.
4 Technical data
4.1 Product
Rated voltage
Weight in accordance with EPTA
Procedure 01, without battery
Speed
Torque range (15 settings)
Torque (soft joint)
Impact speed
Ambient temperature for operation
Storage temperature
32 English
Meaning
If a connected product can still be
used, the remaining battery capac-
ity is below 50 %.
If a connected product can no
longer be used, the battery has
reached the end of its useful life
and has to be replaced. Consult
Hilti Service.
SF 4-22
21.6 V
1.3 kg
1st gear 0 /min ...
610 /min
2nd gear 0 /min ...
2,100 /min
1.5 Nm ...
10 Nm
≤ 36 Nm
•/•
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
2272252
SF 4H-22
21.6 V
1.4 kg
0 /min ...
610 /min
0 /min ...
2,100 /min
1.5 Nm ...
10 Nm
≤ 36 Nm
33,600 /min
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
*2272252*