Publicidad
Idiomas disponibles
Idiomas disponibles
EVERPURE
EVERPURE
H-1200 CARTRIDGE - PART NO. EV9282-01, EV9282-03,
EVERPURE
H-1200 Cartridge - Part Nos. EV9282-01, EV9282-03
IMPORTANT NOTICE: Read this Performance Data Sheet and
compare the capabilities of this unit with your actual water
IMPORTANT NOTICE: Read this Performance Data Sheet and
treatment needs. It is recommended that, before purchasing a
compare the capabilities of this unit with your actual water
water treatment unit, you have your water tested to determine
H-1200 Cartridge - Part Nos. EV9282-01, EV9282-03
treatment needs. It is recommended that, before purchasing a water
your actual treatment needs.
treatment unit, you have your water tested to determine your actual
IMPORTANT NOTICE: Read this Performance Data Sheet and
treatment needs.
FEATURES
compare the capabilities of this unit with your actual water
Finely polishes treated water to premium quality for
•
treatment needs. It is recommended that, before purchasing a water
FEATURES
drinking and cooking.
treatment unit, you have your water tested to determine your actual
NSF/ANSI Standard 53 certified to reduce cysts such as
•
i F
e n
y l
o p
s i l
e h
•
treatment needs.
cooking.
Cryptosporidium and Giardia by mechanical means.
FEATURES
• NSF/ANSI Standard 53 certi ed to reduce c
IAPMO R&T certified against NSF/ANSI 53 for the reduction
•
Cryptosporidium and Giardia by mechanical means.
of perfluorooctanoic acid (PFOA) and perfluorooctane
•
i F
e n
y l
o p
s i l
e h
t s
•
R
d e
c u
s e
d
t r i
sulfonate (PFOS).
PERFORMANCE DATA SHEET
cooking.
manganese - As tested by Everpure).
High-performance system certified to reduce up to 97.5% of
• NSF/ANSI Standard 53 certi ed to reduce c
•
•
C
o
t n
o r
s l
even extreme levels of common "o " tastes and odors,
PFOA/PFOS, commonly known as "forever chemicals".
Cryptosporidium and Giardia by mechanical means.
including those which are earthy, moldy, and shy.
•
Reduces dirt, rust and other particulates sulfides (oxidized iron
R
d e
c u
s e
d
t r i
r ,
s u
•
• Reduces lead to be low the Federal Action L evel of 15 ppb.
manganese - As tested by Everpure).
and manganese – As tested by Everpure).
•
•
C
o
E
t n
f f
o r
c e
s l
v i t
even extreme levels of common "o " tastes and odors,
l e
r y
Controls even extreme levels of common "off" taste and odors,
•
including those which are earthy, moldy, and shy.
trihalomethanes (THMs).
including those which are earthy, moldy, and fishy.
• Reduces lead to be low the Federal Action L evel of 15 ppb.
• E ectively reduces methyl tertiary-butyl ether (MTBE).
Reduces lead to below the Federal Action Level of 15 ppb.
•
•
E
f f
c e
v i t
l e
r y
d e
c u
Effectively reduces Volatile Organic Chemicals (VOCs),
• Reduces particles as small as 0.5 micron in size by mechanical
•
trihalomethanes (THMs).
means.
including Trihalomethanes (THMs).
• E ectively reduces methyl tertiary-butyl ether (MTBE).
GENERAL INSTALLATION/OPERATION/MAINTENANCE
Effectively reduces methyl tertiary-butyl ether (MTBE).
•
• Reduces particles as small as 0.5 micron in size by mechanical
REQUIREMENTS
ERFORMANCE DATA
Reduces particles as small as 0.5 micron in size by
•
means.
mechanical means.
•
S
a p
e c
e r
u q
r i
d e
This system has been tested according to NSF/ANSI
2½ inches of clear space under unit for cartridge change.
the reduction of the substances listed below. The concentration of
ERFORMANCE DATA
H-1200 Performance Data
• Install vertically with cartridge hanging down.
the indicated substances in water entering the sy
This system has been tested according to NSF/ANSI
This system has been tested according to NSF/ANSI 42 and 53
• Use minimum length of tubing possible.
reduced to a concentration less than or equal to the permissible
the reduction of the substances listed below. The concentration of
for the reduction of the substances listed below.
• Flush new cartridge at full flow for three minutes to purge air.
limit for water leaving the sy stem, as speci ed in NSF/ANSI
the indicated substances in water entering the sy
i k
g n
a
d n
The concentration of the indicated substances in water entering
and 53.
•
R
p e
a l
e c
c
r a
i r t
g d
reduced to a concentration less than or equal to the permissible
the system was reduced to a concentration less than or equal to
too slow, but at least annually.
limit for water leaving the sy stem, as speci ed in NSF/ANSI
the permissible limit for water leaving the system, as specified
and 53.
Influent Challenge
Substance
SPECIAL NOTICES
Concentration
i d
o r
, n
in NSF/ANSI 42 and 53.
Standard 42—Aesthetic E ects
• Installation instructions, parts and service availability, and standard
Influent Challenge
Substance
Chlorine
2.0 mg/L ± 10%
warranty are included with the product.
Concentration
Standard 42—Aesthetic E ects
• This drinking water system must be maintained according to
Chloramine
3.0 mg/L ± 10%
Chlorine
2.0 mg/L ± 10%
manufacturer's instructions, including replacement of filter
Particulate,
Class I
at least 10,000
Chloramine
3.0 mg/L ± 10%
cartridges. Suggested retail $122.99.
particles 0.5
particles/mL
Particulate,
• Do not use with water that is microbiologically unsafe or of unknown
to <1 µm
Class I
at least 10,000
quality without adequate disinfection before or after the system.
Standard 53—Health E ects
particles 0.5
particles/mL
to <1 µm
Systems certified for cyst reduction may be used on disinfected
Cyst
Minimum 50,000/L
Standard 53—Health E ects
waters that may contain filterable cysts.
Lead 6.5
0.15 mg/L ± 10%
Cyst
Minimum 50,000/L
• The contaminants or other substances removed or reduced by this
Lead 8.5
0.15 mg/L ± 10%
Lead 6.5
0.15 mg/L ± 10%
water treatment system are not necessarily in your water.
Methyl tert-
0.015 mg/L ± 20%
• Check for compliance with state and local laws and regulations.
Lead 8.5
0.15 mg/L ± 10%
butyl ether
Methyl tert-
• Tested under standard laboratory conditions, actual performance
Chloroform
0.300 mg/L
0.015 mg/L ± 20%
butyl ether
may vary.
PFOA/PFOS
0.0015 mg/L ± 10%
Chloroform
0.300 mg/L
• Spent adsorption media will not be regenerated and used.
PFOA/PFOS
0.0015 mg/L ± 10%
• If adsorption media is affected by chlorine, water supply should be
*Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5°C
treated to remove chlorine prior to entering filter.
*Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5°C
Average
EPA Est. 002623-IL-002
Reduction
The H-1200 is Tested and Certified by NSF
System Tested and Certified by NSF International against
EPA Est. 002623-IL-002
CSA B483.1 and NSF/ANSI 42 and 53 for the claims
International against CSA B483.1 and NSF/ANSI 42
87.8%
specified on the Performance Data Sheet.
The H-1200 is Tested and Certi ed by NSF
and 53 for the claims specified on the Performance
C
US
The H-1200 is Tested and Certi ed by NSF
International against CSA B483.1 and NSF/ANSI
Data Sheet.
and 53 for the claims specified on the Performance
International against CSA B483.1 and NSF/ANSI
98.8%
and 53 for the claims specified on the Performance
Data Sheet.
EPA Est. No. 002623-IL-002
C
US
Data Sheet.
C
US
The H-1200 is certified by IAPMO R&T against
99.99%
NSF/ANSI 53 for the reduction of perfluorooctanoic
acid (PFOA) and perfluorooctane sulfonate (PFOS).
99.3%
99.3%
t s
e r
t a
d e
w
t a
r e
o t
p
e r
m
u i
m
u q
l a
ysts such as
e r
t a
d e
w
t a
r e
o t
p
e r
m
u i
m
u q
l a
y t i
r o f
r ,
s u
a t
d n
o
h t
r e
a p
i t r
u c
t a l
s e
u s
i f l
ysts such as
a t
d n
o
h t
r e
a p
i t r
u c
t a l
s e
u s
i f l
e d
( s
H-104 DRINKING WATER SYSTEMS
d e
c u
s e
o v
t a l
e l i
o
g r
n a
c i
c
e h
m
c i
l a
( s
s e
o v
t a l
e l i
o
g r
n a
c i
c
e h
m
c i
l a
( s
VOCs), including
5 :
x
5
x
0 2
n i
( .
3 1
x
3 1
x
1 5
c
m
i )
c n
stem was
s e
w
h
n e
c
p a
c a
y t i
s i
e r
c a
e h
, d
r o
Max. Permissible Product
Reduction
Water Concentration
Requirements
Max. Permissible Product
Reduction
Water Concentration
Requirements
0.5 mg/L
≥ 50%
0.5 mg/L
≥ 85%
99.95%
0.005 mg/L
99.95%
0.005 mg/L
0.005 mg/L
0.005 mg/L
0.005 mg/L
0.015 mg/L
0.005 mg/L
0.00007 mg/L
0.015 mg/L
0.00007 mg/L
OPERATING SPECIFICATIONS
• Capacity: 1,000 gallons (3,785L)
OPERATING SPECIFICATIONS
• Pressure Requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
• Capacity: 1,000 gallons (3,780L)
• Temperature: 35-100°F (2°-38°C)
• Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
• Flow Rate: 0.5 gpm (1.9 Lpm)
• Temperature: 35-100°F (2-38°C)
OPERATING SPECIFICATIONS
• Flow Rate: 0.5 gpm (1.9 Lpm)
• Capacity: 1,000 gallons (3,780L)
PERFORMANCE DATA SHEET REDUCTION CLAIMS FOR
Performance Data Sheet Reduction Claims
• Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
ORGANIC CHEMICALS INCLUDED BY SURROGATE TESTING
for Organic Chemicals Included by Surrogate Testing
• Temperature: 35-100°F (2-38°C)
y t i
r o f
r d
n i
i k
g n
a
d n
• Flow Rate: 0.5 gpm (1.9 Lpm)
Substance
Performance Data Sheet Reduction Claims
for Organic Chemicals Included by Surrogate Testing
alachlor
r d
n i
i k
g n
a
d n
e d
( s
x o
d i
z i
d e
r i
n o
a
d n
atrazine
benzene
Substance
carbofuran
alachlor
carbon tetrachloride
x o
d i
z i
d e
r i
n o
a
d n
atrazine
chlorobenzene
benzene
chloropicrin
carbofuran
2,4-D
VOCs), including
carbon tetrachloride
dibromochloropropane (DBCP)
chlorobenzene
o-dichlorobenzene
chloropicrin
p-dichlorobenzene
2,4-D
1,2-dichloroethane
dibromochloropropane (DBCP)
1,1-dichloroethylene
o-dichlorobenzene
cis-1,2-dichloroethylene
p-dichlorobenzene
trans-1,2-dichloroethylene
1,2-dichloroethane
1,2-dichloropropane
1,1-dichloroethylene
cis-1,3-dichloropropylene
42 and 53 for
cis-1,2-dichloroethylene
u l
i d
g n
dinoseb
trans-1,2-dichloroethylene
endrin
1,2-dichloropropane
stem was
ethylbenzene
cis-1,3-dichloropropylene
42 and 53 for
dinoseb
ethylene dibromide (EDB)
endrin
haloacetonitriles (HAN):
42
bromochloroacentonitrile
ethylbenzene
w
h
n e
o l f
w
e b
o c
m
s e
dibromoacetonitrile
ethylene dibromide (EDB)
dichloroacetonitrile
haloacetonitriles (HAN):
42
trichloroacetonitrile
bromochloroacentonitrile
Minimum
Average
dibromoacetonitrile
haloketones (HK):
Reduction
Reduction
dichloroacetonitrile
1,1-dichloro-2-propanone
trichloroacetonitrile
1,1,1-trichloro-2-propanone
Minimum
Average
haloketones (HK):
≥ 50%
86.8%
heptachlor
Reduction
Reduction
1,1-dichloro-2-propanone
heptachlor epoxide
1,1,1-trichloro-2-propanone
98.3%
hexachlorobutadiene
86.8%
heptachlor
hexachlorocyclopentadiene
heptachlor epoxide
98.3%
lindane
≥ 85%
98.8%
hexachlorobutadiene
methoxychlor
hexachlorocyclopentadiene
pentachlorophenol
lindane
98.8%
simazine
methoxychlor
99.99%
99.99%
pentachlorophenol
styrene
simazine
1,1,2,2-tetrachloroethane
99.3%
99.3%
99.99%
99.99%
styrene
tetrachloroethylene
98.7%
99.3%
1,1,2,2-tetrachloroethane
toluene
99.3%
99.3%
tetrachloroethylene
2,4,5-TP(silvex)
83.5%
91.5%
98.7%
99.3%
toluene
tribromoacetic acid
2,4,5-TP(silvex)
1,2,4-trichlorobenzene
99.8%
99.8%
83.5%
91.5%
tribromoacetic acid
1,1,1-trichloroethane
95.76 %
97.57 %
1,2,4-trichlorobenzene
99.8%
99.8%
1,1,2-trichloroethane
1,1,1-trichloroethane
95.76 %
97.57 %
trichloroethylene
1,1,2-trichloroethane
trihalomethanes (includes):
trichloroethylene
chlor oform (surrogate
trihalomethanes (includes):
chemical)
chlor oform (surrogate
bromoform
chemical)
bromodichloromethane
bromoform
chlorodibromomethane
bromodichloromethane
xylenes (total)
chlorodibromomethane
42
xylenes (total)
42
NOTE: Spent adsorption media will not be regenerated and used.
NOTE: Spent adsorption media will not be regenerated and used.
NOTE: Spent adsorption media will not be regenerated and used.
If adsorption media is a ected by chlorine, water supply should be
If adsorption media is affected by chlorine, water supply should be
If adsorption media is a ected by chlorine, water supply should be
treated to remove chlorine prior to entering lter.
treated to remove chlorine prior to entering lter.
treated to remove chlorine prior to entering filter.
PERFORMANCE DATA SHEET
PER FORM ANCE DATA SHEE T
H-1200 DRINKING WATER SYSTEMS
H-1200 DRINKING WATER SYSTEM
PER FORM ANCE DATA SHEE T
H-1200 DRINKING WATER SYSTEM
In uent Challenge
Concentration mg/L
0.050
0.100
In uent Challenge
Maximum Permissible Product
0.081
Concentration mg/L
Water Concentration mg/L
0.190
0.050
0.001
0.078
0.100
0.003
0.077
0.081
0.001
0.015
0.190
0.001
0.110
0.078
0.0018
0.052
0.077
0.001
0.080
0.015
0.0002
0.040
0.110
0.0017
0.088
0.052
0.00002
0.083
0.080
0.001
0.170
0.040
0.001
0.086
0.088
0.0048
0.080
0.083
0.001
0.079
0.170
0.0005
0.170
0.086
0.001
0.053
0.080
0.001
0.088
0.079
0.001
0.170
0.044
0.0002
0.053
0.00059
0.022
0.088
0.001
0.024
0.044
0.00002
0.0096
0.015
0.022
0.0005
0.024
0.0006
0.0096
0.0002
0.0072
0.015
0.0003
0.0082
0.080
0.0072
0.0001
0.0107
0.0082
0.0003
0.044
0.080
0.0004
0.060
0.0107
0.0002
0.055
0.044
0.001
0.050
0.060
0.000002
0.096
0.055
0.00001
0.120
0.050
0.0001
0.096
0.150
0.001
0.120
0.081
0.004
0.150
0.0005
0.081
0.081
0.001
0.078
0.081
0.001
0.270
0.078
0.001
0.042
0.270
0.0016
0.160
0.042
0.001
0.084
0.160
0.0005
0.150
0.084
0.0046
0.180
0.150
0.0005
0.180
0.001
0.300
0.300
0.015
0.070
0.070
0.001
EVERPURE
EVERPURE
H-Series Water Filtration Systems
H-Series Water Filtration Systems
Maximum Permissible Product
Water Concentration mg/L
0.001
0.003
0.001
0.001
0.0018
0.001
0.0002
0.0017
0.00002
0.001
0.001
0.0048
0.001
0.0005
0.001
0.001
0.001
0.0002
0.00059
0.001
0.00002
0.0005
0.0006
0.0002
0.0003
0.0001
0.0003
0.0004
0.0002
0.001
0.000002
0.00001
0.0001
0.001
0.004
0.0005
0.001
0.001
0.001
0.0016
0.001
0.0005
0.0046
0.0005
0.001
0.015
0.001
• 11
• 11
Publicidad
