Publicidad
Idiomas disponibles
Idiomas disponibles
EVERPURE
EVERPURE
EVERPURE
H-300-NXT CARTRIDGE - PART NO. EV927441,
EV927446
H-300-NXT Cartridge - Part Nos. EV927441, EV927446
H-300-NXT Cartridge - Part Nos. EV927441, EV927446
IMPORTANT NOTICE: Read this Everpure Performance Data
IMPORTANT NOTICE: Read this Everpure* Performance Data Sheet
IMPORTANT NOTICE: Read this Everpure* Performance Data Sheet
Sheet and compare the capabilities of this unit with your
and compare the capabilities of this unit with your actual water
and compare the capabilities of this unit with your actual water
actual water treatment needs. It is recommended that, before
treatment needs. It is recommended that, before purchasing a water
treatment needs. It is recommended that, before purchasing a water
purchasing a water treatment unit, you have your water tested
treatment unit, you have your water tested to determine your actual
treatment unit, you have your water tested to determine your actual
to determine your actual treatment needs.
treatment needs.
treatment needs.
FEATURES
FEATURES
FEATURES
Finely polishes treated water to premium quality for
•
• Finely polishes treated water to premium quality for drinking and cooking.
drinking and cooking.
• Finely polishes treated water to premium quality for drinking and cooking.
• Reduces chlorine taste and odor.
NSF/ANSI Standard 53 certied to reduce cysts such as
• Reduces chlorine taste and odor.
•
• Reduces dirt, rust and other particulates such as oxidized iron,
Cryptosporidium and Giardia by mechanical means.
• Reduces dirt, rust and other particulates such as oxidized iron,
manganese, and sul des - As tested by Pentair.
Reduces dirt, rust and other particulates sulfides (oxidized iron
•
manganese, and sul des - As tested by Pentair.
• NSF/ANSI Standard 53 certi ed to reduce c
and manganese – As tested by Everpure).
• NSF/ANSI Standard 53 certi ed to reduce c
and Giardia by mechanical means.
Controls even extreme levels of common "off" taste and odors,
•
and Giardia by mechanical means.
• Controls even extreme levels of common "o " tastes and odors, including
including those which are earthy, moldy, and fishy.
• Controls even extreme levels of common "o " tastes and odors, including
those which are earthy, moldy and shy.
Reduces lead to below the Federal Action Level of 15 ppb.
•
those which are earthy, moldy and shy.
• Reduces lead.
Effectively reduces Volatile Organic Chemicals (VOCs),
•
• Reduces lead.
including Trihalomethanes (THMs).
• E ectively reduces Volatile Organic Chemicals (VOCs).
• E ectively reduces Volatile Organic Chemicals (VOCs).
Effectively reduces methyl tertiary-butyl ether (MTBE).
• Reduces particles as small as 0.5 micron in size by mechanical means.
•
Reduces particles as small as 0.5 micron in size by
• Reduces particles as small as 0.5 micron in size by mechanical means.
• NSF/ANSI Standard 401 certi ed for the reduction of the incidental
•
mechanical means.
contaminants/emerging compounds listed in the performance data sheet.
• NSF/ANSI Standard 401 certi ed for the reduction of the incidental
contaminants/emerging compounds listed in the performance data sheet.
H-300-NXT Performance Data
H-104 Cartridge - Part No. EV9612-11, EV9612-16
ERFORMANCE ATA
This system has been tested according to NSF/ANSI 42, 53,
ERFORMANCE ATA
This system has been tested ac cording to NSF/ANSI 42, 53 and 401
and 401 for the reduction of the substances listed below.
IMPORTANT NOTICE: Read this Performance Data Sheet and
for the reduction of the substances listed bel
This system has been tested ac cording to NSF/ANSI 42, 53 and 401
The concentration of the indicated substances in water entering
compare the capabilities of this unit with your actual water
the indicated substances in water entering the s
for the reduction of the substances listed bel
the system was reduced to a concentration less than or equal to
treatment needs. It is recommended that, before purchasing a water
a concentration less than or equal to the permissible limit for water
the indicated substances in water entering the s
the permissible limit for water leaving the system, as specified
leaving the s ystem, as speci ed in NSF/ANSI 42, 53 and 401.
treatment unit, you have your water tested to determine your actual
a concentration less than or equal to the permissible limit for water
in NSF/ANSI 42, 53, and 401.
treatment needs.
leaving the s ystem, as speci ed in NSF/ANSI 42, 53 and 401.
FEATURES
Influent
Max.
Substance
Challenge
Permissible Product
•
i F
e n
y l
o p
s i l
e h
t s
e r
t a
d e
w
t a
r e
Concentration
Water Concentration
Influent
Standard 42—Aesthetic E ects
cooking.
Substance
Challenge
Permissible Product
Chlorine
2.0 mg/L ± 10%
Concentration
Water Concentration
• Reduces chlorine taste and odor.
Particulate, Class I
at least 10,000
Standard 42—Aesthetic E ects
•
R
d e
c u
s e
d
t r i
r ,
s u
a t
d n
o
h t
r e
a p
particles 0.5 to <1 µm
particles/mL
Chlorine
2.0 mg/L ± 10%
manganese, and sulfides.
Standard 53—Health E ects
Particulate, Class I
at least 10,000
• NSF/ANSI Standard 53 certified to reduce cysts such as
Cyst
Minimum 50,000/L
particles 0.5 to <1 µm
particles/mL
Cryptosporidium and Giardia by mechanical means.
Lead 6.5
0.15 mg/L ± 10%
0.005 mg/L
Standard 53—Health E ects
• Reduces common earthy, moldy, fishy tastes and odors.
Lead 8.5
0.15 mg/L ± 10%
0.005 mg/L
Cyst
Minimum 50,000/L
• Reduces lead to below the Federal Action Level.
Chloroform
0.300 mg/L
0.015 mg/L
Lead 6.5
0.15 mg/L ± 10%
(VOC surrogate chemical)
• Reduces particles as small as 0.5 micron in size by mechanical
Lead 8.5
0.15 mg/L ± 10%
*Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5°C
means.
Chloroform
0.300 mg/L
Standard 401—Emerging Contaminants
†
(VOC surrogate chemical)
Phenytoin
*Tested using flow rate = 0.5 gpm; pressure = 60 psig; pH = 7.5 ± 0.5; temp. = 20° ± 2.5°C
200 ± 20% ng/L
0.000030 mg/L
H-104 PERFORMANCE DATA
Ibuprofen
400 ± 20% ng/L
0.000060 mg/L
This system has been tested according to NSF/ANSI 42 and 53 for
Standard 401—Emerging Contaminants
†
Naproxen
140 ± 20% ng/L
0.000020 mg/L
the reduction of the substances listed below. The concentration of
Phenytoin
200 ± 20% ng/L
Estrone
140 ± 20% ng/L
0.000020 mg/L
the indicated substances in water entering the system was reduced
Ibuprofen
400 ± 20% ng/L
Bisphenol A (BPA)
2,000 ± 20% ng/L
0.000300 mg/L
to a concentration less than or equal to the permissible limit for
Naproxen
140 ± 20% ng/L
Nonylphenol
1,400 ± 20% ng/L
0.000200 mg/L
water leaving the system, as specified in NSF/ANSI 42 and 53.
†
Estrone
140 ± 20% ng/L
NSF/ANSI Standard 401 have been deemed as "incidental contaminants/emerging compounds".
Incidental contaminants are those compounds that have been detected in drinking water supplies at
Bisphenol A (BPA)
2,000 ± 20% ng/L
trace levels. While occurring at only trace levels, these compounds can a ect the public acceptance/
Nonylphenol
1,400 ± 20% ng/L
perception of drinking water quality.
†
NOTE: Spent adsorption media will not be regenerated and used.
Influent Challenge
Max. Permissible Product
NSF/ANSI Standard 401 have been deemed as "incidental contaminants/emerging compounds".
Substance
NOTE: Spent adsorption media will not be regenerated and
Concentration
Water Concentration
Incidental contaminants are those compounds that have been detected in drinking water supplies at
If adsorption media is a ected by chlorine, water supply should be
Standard 42—Aesthetic Effects
trace levels. While occurring at only trace levels, these compounds can a ect the public acceptance/
used. If adsorption media is affected by chlorine, water supply
treated to remove chlorine prior to entering lter.
perception of drinking water quality.
Chlorine
2.0 mg/L ± 10%
should be treated to remove chlorine prior to entering filter.
NOTE: Spent adsorption media will not be regenerated and used.
Particulate,
If adsorption media is a ected by chlorine, water supply should be
Class I
at least 10,000
particles 0.5
particles/mL
treated to remove chlorine prior to entering lter.
to <1 µm
Standard 53—Health Effects
Cyst
Minimum 50,000/L
Lead 8.5
0.15 mg/L ± 10%
0.010 mg/L
ysts such as Cryptosporidium
ysts such as Cryptosporidium
ow. The concentration of
ystem was reduced to
ow. The concentration of
ystem was reduced to
Reduction
Minimum
Average
Requirements
Reduction
Reduction
o t
p
e r
m
u i
m
q
a u
t i l
f y
r o
r d
n i
i k
g n
a
Max.
Reduction
Minimum
Requirements
Reduction
Reduction
≥ 50%
86.8%
i t r
u c
t a l
s e
≥ 85%
u s
h c
s a
x o
i d i
e z
i d
98.8%
o r
, n
≥ 50%
≥ 85%
99.95%
99.99
99.99%
99.3%
99.3%
98.7%
99.3%
99.95%
99.99
95.8%
98.9%
0.005 mg/L
99.3%
0.005 mg/L
98.7%
0.015 mg/L
95.8%
>96.3%
>95.8%
>96.8%
0.000030 mg/L
>97.2%
0.000060 mg/L
>99.2%
0.000020 mg/L
>97.1%
0.000020 mg/L
0.000300 mg/L
0.000200 mg/L
Reduction
Minimum
Average
Requirements
Reduction
Reduction
° 50%
° 85%
99.95%
99.99%
99.99%
99.3%
PERFORMANCE DATA SHEET
PER FORM ANCE DATA SHEE T
PER FORM ANCE DATA SHEE T
H-300-NXT DRINKING WATER SYSTEM
H-300-NXT DRINKING WATER SYSTEM
H-300-NXT DRINKING WATER SYSTEM
OPERATING SPECIFICATIONS
OPERATING SPECIFICATIONS
OPERATING SPECIFICATIONS
• Capacity: 300 gallons (1,136L)
• Capacity: 300 gallons (1,136L)
• Capacity: 300 gallons (1,136L)
• Pressure Requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
• Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
• Pressure requirement: 10-125 psi (0.7 - 8.6 bar), non-shock
• Temperature: 35-100°F (2°-38°C)
• Temperature: 35-100°F (2-38°C)
• Temperature: 35-100°F (2-38°C)
• Flow Rate: 0.5 gpm (1.9 Lpm)
• Flow Rate: 0.5 gpm (1.9 Lpm)
• Flow Rate: 0.5 gpm (1.9 Lpm)
Performance Data Sheet Reduction Claims
PERFORMANCE DATA SHEET REDUCTION CLAIMS FOR
Performance Data Sheet Reduction Claims
for Organic Chemicals Included by Surrogate Testing
ORGANIC CHEMICALS INCLUDED BY SURROGATE TESTING
for Organic Chemicals Included by Surrogate Testing
In uent Challenge
Substance
Concentration mg/L
Substance
alachlor
0.050
alachlor
atrazine
0.100
atrazine
benzene
0.081
benzene
carbofuran
0.190
carbofuran
carbon tetrachloride
0.078
chlorobenzene
carbon tetrachloride
0.077
chloropicrin
chlorobenzene
0.015
PERFORMANCE DATA SHEET
2,4-D
0.110
chloropicrin
dibromochloropropane (DBCP)
0.052
2,4-D
o-dichlorobenzene
0.080
dibromochloropropane (DBCP)
p-dichlorobenzene
0.040
o-dichlorobenzene
1,2-dichloroethane
0.088
p-dichlorobenzene
1,1-dichloroethylene
0.083
1,2-dichloroethane
cis-1,2-dichloroethylene
0.170
1,1-dichloroethylene
trans-1,2-dichloroethylene
0.086
cis-1,2-dichloroethylene
1,2-dichloropropane
0.080
trans-1,2-dichloroethylene
cis-1,3-dichloropropylene
0.079
1,2-dichloropropane
dinoseb
0.170
cis-1,3-dichloropropylene
endrin
0.053
dinoseb
ethylbenzene
0.088
GENERAL INSTALLATION/OPERATION/MAINTENANCE
endrin
ethylene dibromide (EDB)
0.044
REQUIREMENTS
ethylbenzene
haloacetonitriles (HAN):
bromochloroacentonitrile
0.022
ethylene dibromide (EDB)
dibromoacetonitrile
0.024
•
S
a p
e c
e r
u q
r i
d e
5 :
x
5
haloacetonitriles (HAN):
dichloroacetonitrile
0.0096
bromochloroacentonitrile
2½ inches of clear space under unit for cartridge change.
trichloroacetonitrile
0.015
dibromoacetonitrile
haloketones (HK):
• Install vertically with cartridge hanging down.
dichloroacetonitrile
1,1-dichloro-2-propanone
0.0072
trichloroacetonitrile
• Use minimum length of tubing possible.
1,1,1-trichloro-2-propanone
0.0082
haloketones (HK):
• Flush new cartridge at full flow for three minutes to purge air.
heptachlor
0.080
1,1-dichloro-2-propanone
d n
heptachlor epoxide
0.0107
1,1,1-trichloro-2-propanone
•
R
p e
a l
e c
c
r a
i r t
g d
s e
w
hexachlorobutadiene
0.044
Average
heptachlor
too slow, but at least annually.
hexachlorocyclopentadiene
0.060
heptachlor epoxide
lindane
0.055
SPECIAL NOTICES
hexachlorobutadiene
methoxychlor
0.050
hexachlorocyclopentadiene
86.8%
pentachlorophenol
0.096
• Installation instructions, parts and service availability, and standard
lindane
simazine
0.120
warranty are included with the product.
98.8%
methoxychlor
styrene
0.150
• This drinking water system must be maintained according to
pentachlorophenol
1,1,2,2-tetrachloroethane
0.081
simazine
tetrachloroethylene
manufacturer's instructions, including replacement of filter
0.081
99.99%
styrene
toluene
0.078
cartridges. Suggested retail $122.99.
1,1,2,2-tetrachloroethane
99.3%
2,4,5-TP(silvex)
0.270
• Do not use with water that is microbiologically unsafe or of unknown
tetrachloroethylene
tribromoacetic acid
0.042
99.3%
quality without adequate disinfection before or after the system.
1,2,4-trichlorobenzene
toluene
0.160
98.9%
1,1,1-trichloroethane
0.084
2,4,5-TP(silvex)
Systems certified for cyst reduction may be used on disinfected
1,1,2-trichlor oethane
0.150
tribromoacetic acid
waters that may contain filterable cysts.
trichl oroethylene
0.180
1,2,4-trichlorobenzene
• The contaminants or other substances removed or reduced by this
trihalomethanes (includes):
1,1,1-trichloroethane
chloroform (surrogate
water treatment system are not necessarily in your water.
1,1,2-trichlor oethane
chemical)
>96.3%
trichl oroethylene
• Check for compliance with state and local laws and regulations.
bromoform
0.300
bromodichloromethane
>95.8%
trihalomethanes (includes):
• Tested under standard laboratory conditions, actual performance
chlorodibromomethane
chloroform (surrogate
>96.8%
xylenes (total)
may vary.
0.070
chemical)
>97.2%
bromoform
• Spent adsorption media will not be regenerated and used.
bromodichloromethane
The H-300-NXT is Tested and Certi ed by NSF
>99.2%
• If adsorption media is affected by chlorine, water supply should be
chlorodibromomethane
International against CSA B483.1 and NSF/ANSI
>97.1%
xylenes (total)
treated to remove chlorine prior to entering filter.
42, 53, and 401 for the claims speci ed on the
C
US
Performance Data Sheet.
The H-300-NXT is Tested and Certi ed by NSF
The H-300-NXT is Tested and Certified by NSF
System Tested and Certified by NSF International against
International against CSA B483.1 and NSF/ANSI
EPA Est. 002623-IL-002
CSA B483.1 and NSF/ANSI 42 and 53 for the claims
International against CSA B483.1 and NSF/
87.8%
42, 53, and 401 for the claims speci ed on the
specified on the Performance Data Sheet.
ANSI 42 and 53 for the claims specified on the
C
US
C
US
Performance Data Sheet.
Performance Data Sheet.
98.8%
EPA Est. 002623-IL-002
EPA Est. No. 002623-IL-002
EVERPURE
EVERPURE
99.3%
Maximum Permissible Product
In uent Challenge
Maximum Permissible Product
Water Concentration mg/L
Concentration mg/L
Water Concentration mg/L
0.001
0.050
0.001
0.003
0.100
0.003
0.001
0.081
0.001
0.001
0.190
0.001
0.0018
0.078
0.001
0.0018
0.077
0.0002
0.001
0.0017
0.015
0.0002
0.00002
0.110
0.0017
0.001
0.052
0.00002
0.001
0.080
0.001
H-104 DRINKING WATER SYSTEMS
0.0048
0.040
0.001
0.001
0.088
0.0048
0.0005
0.083
0.001
0.001
0.170
0.0005
0.001
0.086
0.001
0.001
0.080
0.001
0.0002
0.079
0.001
0.00059
0.170
0.0002
0.001
0.053
0.00059
0.00002
0.088
0.001
0.0005
0.044
0.00002
0.0006
x
0 2
n i
( .
3 1
x
3 1
x
1 5
c
m
i )
c n
u l
i d
g n
0.0002
0.022
0.0005
0.0003
0.024
0.0006
0.0096
0.0002
0.0001
0.015
0.0003
0.0003
0.0004
0.0072
0.0001
0.0002
0.0082
0.0003
h
n e
c
p a
c a
y t i
s i
e r
c a
e h
, d
r o
w
h
n e
0.001
0.080
0.0004
0.000002
0.0107
0.0002
0.00001
0.044
0.001
0.0001
0.060
0.000002
0.001
0.055
0.00001
0.004
0.050
0.0001
0.0005
0.096
0.001
0.001
0.120
0.004
0.001
0.150
0.0005
0.001
0.081
0.001
0.0016
0.081
0.001
0.001
0.078
0.0005
0.001
0.0046
0.270
0.0016
0.0005
0.042
0.001
0.001
0.160
0.0005
0.084
0.0046
0.150
0.0005
0.180
0.001
0.015
0.001
0.300
0.015
0.070
0.001
H-Series Water Filtration Systems
H-Series Water Filtration Systems
EVERPURE
H-Series Water Filtration Systems
o l f
w
e b
o c
m
s e
• 13
• 13
• 13
Publicidad
