zopa MATRIX ZOP022580 Manual página 18

INSTALLING MATRIX CAR SEAT IN THE VEHICLE
1. Place the MATRIX in a suitable forward-facing position equipped ISOFIX connection
points. If the vehicle's seat back is adjustable, ensure it is in the upright position.
2. Extend the ISOFIX connectors (H) by pushing the ISOFIX adjustment handle (J)
and extending the sliders
3. Insert the ISOFIX connectors (H) to the ISOFIX connection point in the car. Make sure
that there is a "click" sound and a green indication on both ISOFIX indicators (H).
4. Push the MATRIX towards the vehicle seat back until there is no space between
the vehicle seat back and the MATRIX.
5. Attach the ASIP (M) by locating the side ASIP attachment (C) on the side of the
MATRIX closest to the vehicle door. Press the ASIP button (N) and slide it into
position.
RESTRAINING YOUR CHILD IN THE MATRIX CAR SEAT
6. Place your child in the MATRIX, pull out the vehicle seat belt and slot the shoulder
strap through the red shoulder belt guide (L) nearest the belt attachment.
7. Pull out the vehicle seat belt in front of your child to the vehicle seat buckle. Lock
the vehicle seat belt into the buckle ensuring it "CLICKS" into place.
8. Place the lap belt through the red side lap belt side guides (F)
9. Slot the lap belt into the lap belt middle guide (E). Although optional we strongly
advise using the middle lap belt guide.
IMPORTANT: Tighten the vehicle seat belt by pulling the diagonal seat belt section,
check that all slack has been removed from the vehicle seat belt.s
18