zopa MATRIX ZOP022580 Manual página 20

REMOVING MATRIX CAR SEAT FROM YOUR VEHICLE
To remove the MATRIX from the vehicle, press both ISOFIX buttons to release the
MATRIX from the ISOFX connection points and lift the seat out of the vehicle. To
remove the ASIP, push the button on the ASIP and remove.
CARE AND MAINTENANCE
The MATRIX cover can be removed and washed in a washing machine at 30 °C on the
"Gentle Cycle" program. Do not put the cover in a dryer as this can damage the cover
and the padding may separate from the fabric.
Removing and refitting the seat covers.
• Raise the headrest to its highest position to allow for more room to work.
• Start with the base cover and remove the elastic loops from their hooks and remove
the base cover.
• Headrest cover: remove the elastic loops from their hooks and remove the head
cover.
• Side-wing covers: pull the cover from the top of the wing and then down and off.
• Repeat on the other wing.
• To refit the seat covers: reverse the above steps.
Any plastic parts of MATRIX can be cleaned with mild detergent and water. Do not use
aggressive chemicals containing solvents etc., as this can cause damage to the plastic
and compromise the safety of the MATRIX.
All materials used in MATRIX are recyclable and should be recycled as per your local
legislation. Ask your local recycling center for advice when recycling this product.
Do not make any modifications or alterations to MATRIX other than those described
in this instruction manual. Follow the instructions in this manual carefully. Any repairs
must be carried out by the manufacturer or agent.
If the seat cover needs replacing, ensure only original products from Zopa are used. If
other products are used, the MATRIX safety system may be compromised and could
lead to severe injury in case of an accident.
20