Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance / care
Clean the machine with water and a brush after use
and lubricate the moveable parts as well as the rack
with original Würth Silikon Spray.
Always keep the machine and cooling air vents free
and clean. It must always be kept in a dry, frost-free
place.
Clean the filter of the vacuum pump
The condition of the filter must be checked at regular
intervals.
Loosen the four screws with hexagonal recess on the
■
bottom of the frame 45.
Unscrew filter cover 38.
■
If necessary, renew filter parts.
■
Screw on filter cap 38 again. The arrows on the
■
cap must point in the direction of flow of the sucked
in air.
Mount the pump on the frame 45 again.
■
If – in spite of meticulous manufacturing and testing
processes – the device breaks down, have it serv-
iced by a Würth masterService®.
Please provide the item number given on the
device's nameplate whenever you have an enquiry
or if you want to order replacement parts.
This device's current replacement parts list can be
found on the Internet at http://www.wuerth.com/
partsmanager or requested from your nearest Würth
branch office.
Guarantee
For this Würth appliance we grant a warranty in
accordance with the statutory/country-specific
provisions as from date of purchase (by evidence of
invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is excluded from the warranty.
Claims can be recognized only if the appliance is
presented in a not-disassembled manner to a Würth
branch office, your Würth field service employee or
a customer service office for power tools authorized
by Würth.
19
Publicidad
