Teka HRB Serie Manual Del Usuario página 17

Description of the electronic clock/timer
1. LED light function - START
2. LED light function - STOP
3. LED light function - TIMER
4. LED light function - TIME
5. Clock control button
using your oven
COnnECTIOn TO THE MAInS
ElECTRICITY
On connecting the oven to the mains electrical
power for the first time, or after a power cut,
the LED (4) flashes constantly. The oven
will not function in this mode.
The clock operation is controlled with the
clock control button
This control has the following functions:
• Press it consecutively to scroll through
the functions in clockwise direction.
• Press it to confirm the selected function.
• Turn it left or right to select cooking
start times, cooking end times and to
programme the alarm.
• Hold it down to change the clock
operation to manual.
Hold down the control button
seconds until the LED
the stand-by mode is activated.
SETTIng THE TIME
Press the control button
until the LED flashes
control button (5) until the hands of the
clock are at the required time.
The time can only be set if there are no alarms
or cooking functions programmed.
After adjusting the time on the clock, press the
control button (5), to confirm the selection.
English
(5).
(5) for 3
(4) goes out, and
(5) several times
(4), then turn the
17
User's Guide