Teka HRB Serie Manual Del Usuario página 18

PROgRAMMIng THE AlARM (TIMER)
Press the control button
until the LED flashes
control button
clock are at the required time.
After adjusting the alarm time on the clock,
press the control button
If the alarm is not activated within 10 seconds
of selecting the menu, it will be cancelled.
If the alarm is active, the alarm symbol on the
clock remains lit.
Press and release the control button
to display the programmed time of the alarm.
The hands will indicate the time selected for
the alarm for 2 seconds and then return to the
current time.
Press the control button
to cancel the programmed alarm.
At most, the alarm can be set for up to 3 hours
after the current time and at minimum, up to 2
minutes after the current time.
The alarm activation is independent to the
oven operation. It is only an acoustic signal.
18
User's Guide
(5) several times
(3), then turn the
(5) until the hands of the
(5) to activate it.
(5) for 2 seconds
The oven does not turn off at the end of the
timer period. This function can also be used
while the oven is in use.
OVEn TIMER FunCTIOn
Programming the Cooking Start Time
Press the control button
until the LED
Programme the cooking start time by turning
the control button
After adjusting the start time, press the control
(5)
button (5) to confirm the selection.
If the selection is not confirmed within 10
seconds of selecting the menu, it will be
cancelled.
The cooking end time must be programmed
after setting the start time, otherwise the
cooking start time will be deleted.
The cooking start time can be programmed for
up to 12 hours after the current time.
The cooking start time can only be programmed
from 2 minutes after the current time.
(5) several times
(1) flashes.
(5), to the right or left.