▪ Press power switch for 3 seconds to turn on or turn off the appliance
▪ Press temperature control button "
LED display from Celsius to Fahrenheit
▪ You can set the desired temperature by pressing "
The temperature selected will increase/decrease by 1°C with each press of the buttons.
IMPORTANT: to optimize the operation of the appliance, it is important to set the
temperatures respecting a difference of 10°C maximum between the upper and lower
compartment (18 and 8°C for example).
Handle installation SLS102DZ – SLS102DZS
➢
This wine cooler includes one stainless steel handle and handle installation accessories
(handle screw, handle screw washer, black metal washer and black silicone gasket), follow
the instructions below to install the handle.
1. Gently pull away the door seal in the area where the handle is to be installed. The gasket
is easily
displaced by hand, no tools are necessary, please do not use too much force to
avoid damaging the door seal.
" and "
" together for 3 seconds to change the
" or "
37
" of each zone