Publicidad
Idiomas disponibles
Idiomas disponibles
1. Close the door
2. Remove the right upper hinge cover ①, and then unscrew ② and remove the hinge③.
Remove the left hinge hole cover pad ④
3. Remove the door from the cabinet by opening it slightly and lifting
4. Remove the lower hinge parts at the right and then install it at the left
Remove door support parts at the left and then install it at the right
5. Turn the door by 180°
6. Slightly lift the door, move it down till fit into the door pivot on the lower hinge.
7. Relocate the upper hinge part at the left, and cover the right hinge hole with black pad
Reversible door SLS102DZBLACK
This door of the appliance is reversible, the door is set to be hinged right at purchase,
you can change it to the left by following below instructions:
1. Close the door, remove the upper hinge cover and upper hole cover pad on top
side using a flat-head screwdriver.Remove the upper hinge by unscrewing 4pcs
of hex head screws, then remove the door from the cabinet carefully by opening
the door slightly and lifting it up and set it aside. Attention: The door is heavy,
handle it carefully with an assistant.
2. After door is removed, lie down the wine cooler on a soft mat. Remove the
lower hinge at the right bottom and door support at the left bottom.
3. Install the lower hinge to the left bottom and door support to the right bottom.
4. Move the hinge hole cap (at the top of the door) from the left side to the right
side. Move the door stopper (at the bottom of the door) from right side to the left
side by using a Philips screwdriver.
5. Hold the door carefully and place it on top of the lower hinge
6. Install the upper hinge at the left top of the cabinet, and cover the upper hole
with upper hole cover pad.
39
Publicidad
