Publicidad
Idiomas disponibles
Idiomas disponibles
5. Once soleplate temperature has reached the preset temperature,
indicator light will be off, then set steam button to your desired steam
output or dry position and begin ironing.
WARNING: Not touch hot soleplate at any time before cooling down!
6. Press spraying water button a couple of times to moisten the laundry
if necessary, before spraying make sure that there is enough water in
water tank.
7. Steam shot function had better be used at max temperature, as it helps
remove stubborn creases.
8. The iron has an anti-drip function: this prevents water escaping from
the soleplate when the iron is too cold.
9. "Steam shot" can also be applied when holding the iron in a vertical
position, so this is useful for removing creases from hung clothes,
curtains, etc.
10.The iron has auto shut off function,if the iron is motionless,it will switch
off after about 30 seconds with the soleplate down,or about 8 minutes
if it's upright.
How to fill the water tank.
1. Unplug the iron.
2. Set the steam button to dry ironing .
3. Hold the iron in a tilted position,open the water filling inlet cover then
fill proper water into water tank by measuring cup, you had better use
purified water with less calcium particles and make sure not to exceed
Max level on the tank.
4. Press down water fill inlet cover and you will hear a click if it is in the
correct position.
5. Do not store the iron with water in the tank.
16
INGLÉS
Publicidad
