TM Electron TMPPL016 Manual De Instrucciones página 17

CLEANING AND MAINTENANCE
After ironing
1. Disconnect power supply and empty the water left in water tank.
2. Reconnect into power supply and disconnect after indicator light
goes off, make soleplate dry.
3. Let the iron completely cool down, then wipe flakes and any other
deposits on the soleplate with a damp cloth or a non-abrasive
(liquid) cleaner.
4. Clean the upper part of iron with a damp cloth.
5. Always store the emptied iron horizontally on a stable surface with
a cloth protecting the soleplate.
Self-clean function
We should clean the unit regularly according to hardness of water and
using frequency.
1. Fill water into the water tank and set the temperature selector to
Max position
2. Connect into power supply and indicator light will be illuminated,
make sure Steam button is in the Dry position, then place iron as
fig.4
Warning: never pour white vinegar or other liquid cleaners for elimina-
ting calcium into water tank!
3. Once the light is off, hold the iron over the sink and turn steam but-
ton to SELF CLEAN position (Fig.3) with a little force. Steam and
boiling water will come out of the soleplate while impurities and
flakes will be flushed out.
4. Release the button as soon as water in the water tank has been
used up.
INGLÉS
17