Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use
1. Place Can Opener on level
surface. Plug into outlet.
5. Motor will automatically
stop when can is open. Lift
Piercing Lever Assembly
Handle and remove can.
6
2. Raise Piercing Lever
Assembly Handle up.
NOTES:
• If there is a bump, dent, or heavy seam in the rim of the can, open
other end of can or start Cutting Blade just beyond it.
• The motor of the Can Opener is permanently lubricated and will
require no oiling.
• Can Opener will easily open all standard size cans.
• Cans made with aluminum lids will not adhere to magnet.
3. Place rim of can firmly under
Can Guide and against
Geared Wheel. Tilt top of can
in, to position Cutting Blade
inside rim of can.
4. Press Piercing Lever
Assembly Handle all the
way down. Motor will begin
turning can and cutting lid.
It is not necessary to hold
Piercing Lever Assembly
Handle down, or to hold can
during cutting action when
opening smaller cans. When
opening a larger can, user
may need to stabilize Can
Opener with one hand.
Publicidad
