BLUEFIN Fitness S.TOUR FIT Manual De Instrucciones página 8

A S S E M B L Y I N S T R U C T I O N S
2.
1. First unscrew the pre-locked nut and gasket on the seat cushion (13), and then screw it onto the sliding seat
(16) with the N-type tool.
2. After removing the knob (20), gasket (19), sleeve (17) and carriage screw (84) on the sliding seat, insert the
combined seat cushion into the seat tube (21).
3. Put a sleeve (17) on the carriage screw (84), then put it into the corresponding hole on the seat slider (16),
and finally put the knob (20) and the gasket together with the teeth of the carriage screw (84).
//
0 8
1.
1. Prepare a clean area. Take the
main bike frame, with all of its
parts out of the carton.
Check the parts with the parts
list to make sure there's no
missing part in the carton.
2. Assemble the front and rear
stabilizers to the base post with
4 bolts (42) and wave washers
(66)