BERG PlayBase Rahmen Medium LL Manual De Usuario página 6

EN
3. Inspection and maintenance
To ensure the safety of the users of the product, the product has to be subjected to the safety inspections and
maintenance instructions mentioned below If the checks are not carried out regularly the product could overturn or
otherwise become a hazard.
Frame, nuts & bolts
Suspension points
Accessories
• There must be no objects / sharp objects on the floor underneath the unit and in the movement area.
• Check all nuts and bolts for tightness and tighten when required.
• Missing or worn components must be replaced or repaired immediately.
• Oil all metallic moving parts.
• Check all coverings for bolts and sharp edges and replace when required.
• Check chains, ropes and other means of attachments for evidence of deterioration.
• Replace defective parts in accordance with the manufacturers' instructions.
• The swing joints are fixed on one side: Explicit attention should be paid to checking the suspension points and
replacing them immediately if there is visible damage
• Follow your local guidelines for the disposal of all materials.
6
Before each use
Check for visible damage
Inspect condition of
suspension points. Replace
immediately if needed
Check condition
Monthly
Check if connections are
tight and tighten them if
needed
Oil the suspension points
Check for wear and tear
Beginning of each season
Inspect the frame
connections thoroughly
Thorough inspection of
suspension points. Replace
immediately if needed
Check for wear and tear
and replace if needed