Kicker PXA Serie Manual Del Propietário página 12

Set your voltmeter or oscilloscope to
measure AC voltage. Place the voltmeter's
probes on the amplifier's speaker output
terminals. With the sine wave playing, slowly
turn the gain knob clockwise and watch the
AC voltage on the voltmeter increase. When
the desired voltage is shown (reference
power chart insert), or you start to see
the waveform square off stop increasing
the gain, turn the amplifier off, reconnect
all speakers and set the crossovers to
your desired setting. Your gain is now set
for maximum unclipped power from the
amplifier. If you increase amplitude using
settings on the source unit or the bass
boost on the amplifier it will introduce
distortion and you will need to redo these
steps.
English 12