Descargar Imprimir esta página

Kamikaze KVS5500 Guia Del Usuario página 31

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

• Do not rely solely on the safety equipment fitted to the chainsaw.
• A variety of measures must be taken to prevent accidents or personal injury during operations.
• To avoid sudden bounces, hold the saw firmly. Adjust body and arms position to avoid bouncing. The
operator can check and calibrate the bounce force and take the necessary precautions before
starting work.
• Do not extend your arms too much while cutting and do not hold the tool higher than the shoulders.
• Use only replacement bars and chains specified by the manufacturer. Improper replacement of bars
or chains can cause the chain to break and / or rebound.
3.2. Other safety instructions
Use appropriate clothing, use
protective shoes with non-slip soles.
Use protective gloves.
• Do not wear loose clothing or jewelry that could get tangled in moving parts.
• Pay attention, do not get distracted, use common sense when using the tool. Do not use the tool if
excessively tired or under the influence of drugs, drugs, alcohol or other substances.
• Do not use the chainsaw in rainy weather.
• The tool is designed for pruning branches, do not use on hard wood or other objects.
• If the chain is locked, disconnect the battery before handling. Do not handle while the chain is on.
• Before starting pruning, check that there are not hidden objects and cables between the branches.
• During use, firmly grab the tool and keep the chain at a distance of at least 15 cm from the rest of the
body.
• Do not use the tool near flammable liquids or gases to avoid the risk of fire or explosion.
The wear of the chain must be checked regularly. Damages resulting from use with a chain and / or
bar in poor condition are not covered by the warranty.
Do not try to repair the tool yourself, always bring the tool to service centers in case of need for
repairs. All repair and maintenance operations not described in this manual must be carried out by
the service center.
3.3. Special safety instructions for battery-powered tools
• The charger is designed for indoor use. Charging operations must be made indoor.
• Remove the battery before cleaning the charger to avoid damages and risk of electric shock.
• To avoid the risk of explosion, do not expose the battery to the sun or intense light. Do not place in
contact or near hot surfaces.
• Allow the battery to cool completely before starting charging.
• Do not disassemble or damage the battery to avoid personal injury
3.4. Correct use of the battery charger
Use protective glasses
30

Publicidad

loading