detergents to clean the tool to avoid damaging the surfaces.
• Clean the body of the chainsaw with a damp cloth.
• Remove the protective pinion cover.
• Clean the area around the pinion and the body with a damp cloth.
• Remove the bar and the chain as specified in paragraph 14.2
• Clean the oil outlet (1), oil inlet (2) and rear bar slot (3) and the cooling grid (4) with a soft brush.
•
Clean the chain with a soft brush.
•
Assemble again the bar, the chain and the cover as specified in paragraph 14.3
14.1. Maintenance
General maintenance, cleaning, lubrication and the replacement of the chain and / or bar require
disassembly and assembly of the chainsaw.
39