EN
Symbol
Name
DANGER ---
Keep Hands
and Feet
Away
DANGER ---
Keep By-
standers
Away
DANGER ---
Thrown Deb-
ris
DANGER ---
Steep Slope
Hazard
5
RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
6
INSTALLATION
Do not change or make accessories that are not
recommended by the manufacturer.
Explanation
To reduce the risk of in-
jury, keep hands and feet
away from rotating parts.
Do not operate unless
discharge cover or grass
bag is in its proper place.
If damaged, replace im-
mediately.
Do not mow when chil-
dren or others are near-
by.
Remove objects that can
be thrown by the blade in
any direction. Wear safe-
ty glasses.
Use extra caution on
slopes. do not mow
slopes greater than 15
degrees.
MEANING
Indicates an imminently
hazardous situation,which,
if not avoided, will result in
death or serious injury.
Indicates a potentially haz-
ardous situation,which, if
not avoided, could result in
death or serious injury.
Indicates a potentially haz-
ardous situation, which, if
not avoided, may result in
minor or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
WARNING
English
Do not connect the machine to the power supply until
you assemble all the parts.
6.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
•
If the parts have damage, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
6.2
UNFOLD AND ADJUST THE
HANDLE
Figure 2.
1. Pull up and back the upper handle to lift the handle
into operation position. Make sure that the handles
click into position correctly.
2. Tighten the lower handle with the handle knobs on
the two sides.
3. Tighten the upper handle with the cam locks on the
two sides.
Make sure that the two handles are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
6.3
INSTALL THE GRASS CATCHER
Figure 3.
1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door and hold it.
4. Hold the the grass catcher by its handle and engage
the hooks on the door rod.
6
WARNING
WARNING
WARNING
NOTE
WARNING