Sabo 53-M VARIO Manual Del Operador página 44

Mower paths do not
overlap sufficiently.
Grass is wet.
Pos: 24.3.1 1 /Inne ntei l/Stö run gsu rsa chen un d dere n Be seiti gung/ Stö rung stabel leneleme nte/ Auswu rf verst opft, Benzin, JS63 @ 2 2\mod_1 353 3229 798 89_ 6.docx @ 165 427 @ @ 1
Engine speed too low.
Housing blocked
Cutting height too low
and grass too high.
Excessive mowing
speed.
Grass is wet.
In case of faults and defects which have not been listed here, please contact the
nearest authorised workshop.
Repairs which require specialised knowledge should only be performed by a qualified
expert. Your authorised workshop will naturally also be glad to help if you do not wish to
perform the maintenance work described here yourself.
19 TECHNICAL DATA
Engine
Pos: 25.4 /Innente il/Tech nis che Da ten/Moto r SAU1 5802 B& S 85 0E I/C @ 5 6\mod_1 549 367 9847 67_ 6.docx @ 596 492 @ @ 1
Engine
Capacity
Rotation speed
Rated power
Electrode gap
Fuel
Tank capacity
Lubricating oil
Oil quantity
Pos: 25.5 /Innente il/Tech nis che Da ten/1.1 Mähe r @ 2 6\mod_1 377 506 1153 92_ 6.docx @ 193 427 @ 2 @ 1
Mower
Pos: 25.6 /Innente il/Tech nis che Da ten/Mäher J S63 VARIO/C/JS63 V/C_SA2 220 19/222 119/2 270 19/22 711 9 @ 66\mod _15 946 4142 085 2_6.d ocx @ 6 3595 9 @ @ 1
Housing
Cutting width
Cutting heights
Height adjustable guide bar
Travel speed
Weight
Length
Width
Height
Wheels front / rear
Bearing front
Bearing rear
Pos: 25.7 /Innente il/Tech nis che Da ten/1.1 Scha llle istu ngspe gel @ 2 6\mod_1 377 5063 181 78_ 6.docx @ 1934 59 @ 2 @ 1
Sound power level
Guaranteed sound power level; measured according to
2000/14/EC
Pos: 25.9 /Innente il/Tech nis che Da ten/1.1 Scha lld ruckpe gel @ 2 6\mod_1 377 506 4232 45_ 6.docx @ 193 475 @ 2 @ 1
Sound pressure level
Pos: 25.10 / Innen teil/Tec hni sche Daten/ Schal ldruckpege l 80_ 1,5_ EN ISO 539 5-2 @ 6 3\mod_1 574 6881 704 74_6 .docx @ 6216 70 @ @ 1
Emission sound pressure level at operator's workplace;
measured according to EN ISO 5395-2
Measuring inaccuracies; according to ISO 4871
Pos: 25.11 / Innen teil/Tec hni sche Daten/1.1 Sc hwing ungen @ 26\mod_ 137 750 6598 160 _6.do cx @ 19 349 1 @ 2 @ 1
Vibrations
Pos: 25.12 / Innen teil/Tec hni sche Daten/ Schwi ngunge n 3,6 @ 27\mod_ 138 071 0656 301 _6.do cx @ 19 705 0 @ @ 1
Vibrations at the guide bar;
measured according to EN ISO 5395-2
Measuring inaccuracies; according EN 12096
With high grass, the mowing
paths may possibly have to
overlap more.
Set higher cutting height V3 .
Let lawn dry.
Have it checked by an
authorised workshop.
Set higher cutting height V3 .
Adjust the mowing speed
and switch off the autodrive,
if necessary.
Let lawn dry.
LONCIN 4-stroke engine, V200
196 cm
3
2800 rpm
3.4 kW
0.7 – 0.8 mm
Lead-free standard fuel, with max.
10% ethanol
approx. 1.0 litres
SAE 30, SAE 10W30, SAE 5W30 or
similar brand name oil minimum
quality SF
0.5 litres
Steel
530 mm
per axis, 7x 20 - 97 mm
3 times
2.5 – 5.2 km/h
37.5 kg
1650 mm
570 mm
945 mm
Ø 210 mm / Ø 210 mm
Cup-and-cone bearing
Needle bearing
L = 96 dB(A)
wa
L = 80 dB(A)
pA
1.5 dB
a = 4.7 m/s
2
hW
1.7 m/s
2
20 ORIGINAL SPARE PARTS AND ACCESSORIES
Pos: 26.3 /Innente il/Orig inal-E rsat ztei le und Zube hör/E rsat ztei le JS6 3 VARIO/C/JS63 V/C @ 31\mod _14 056 6379 271 1_6.d ocx @ 2 3583 2 @ @ 1
Engine oil
Roller bearing grease
Spark plug
Air filter
Cutter bar
=== Ende der Liste fü r Textma rke In halt ===
12
SA24208
SAA11300
SAE10005
SAE10006
For safety reasons, the cutter bar must
always be replaced by an authorised
workshop. This workshop has
respective spare part number for the cutter
bar available.
the