Husqvarna Automower EPOS Plug-in Kit Manual De Usuario página 103

37.4 Safety instructions for
maintenance
WARNING:
instructions that follow before you use the
product.
• Disconnect the product from the power supply
before you clean or do maintenance on the
product.
38.1 Introduction
Serial number:
Product number:
The serial number is on the product rating plate and on the product carton. Use the serial number to register your
product on www.husqvarna.com.
38.1.1 Support
For support about the product, speak to your Husqvarna
servicing dealer.
38.1.2 Product description
Note:
Husqvarna regularly updates the appearance
and function of the products. Refer to
103 .
™
This kit includes an EPOS reference station and a
™
EPOS Plug-in to be installed on your 320/430X/450X
NERA robotic lawn mower. The EPOS
1944 - 001 - 13.01.2023
Read the warning
38 Introduction
Support on page
™
reference
37.5 In the event of a thunderstorm
To decrease the risk of damage to electrical
components in the reference station, we recommend
that the power supply to the reference station is
disconnected if there is a risk of a thunderstorm.
Connect the power supply again when there is no a risk
of thunderstorm.
station receives satellite signals and sends correction
data to the robotic lawn mower. The EPOS
use satellite signals and the correction data from the
reference station for positioning.
38.1.3 System description
™
The EPOS system contains a robotic lawn mower,
a charging station and a reference station. The
robotic lawn mower and the reference station receives
satellite signals for positioning. The reference station is
stationary and sends correction data to the robotic lawn
mower to get an accurate position for the mower. The
work area is made virtually in an app by operating the
product and adding waypoints to make a map in an app.
™
Plug-in
Introduction - 103