Publicidad
Idiomas disponibles
Idiomas disponibles
4. APPLIANCE ON / OFF AND TEMPERATURE SETTING
EN
4.2 How to adjust the temperature for
different requirements.
Each model has been carefully tested before leaving
the factory and is adjusted in such a way to ensure
high performance and low power consumption.
Usually, it is not necessary to modify the settings.
Follow the following on screen steps to
personalize the temperature settings:
FUNCTIONS
10
Upper
+
°C
compartment.
temperatures
SETTINGS
5
Lower
+
°C
compartment.
14
Modify the compartment temperatures
Example: How to modify the upper compartment
temperature.
FUNCTIONS
10
+
°C
1) Home screen.
Touch icon
SETTINGS
5
for upper compart-
+
°C
ment.
+4
OFF
2) Scoll up/down to
select the desired
+5
temperature.
+6
°C
Upper Compartment
+7
Preset
OK
from +39°F to +64°F
+8
(from +4°C to +18°C).
+4
OFF
+5
3) Touch OK to con-
firm
+6
°C
temperature.
+7
OK
+8
The temperature shown can vary slightly
in respect to the set temperature following
frequent openings of the doors or insertion of
room temperature items.
It might take between 6 to 12 hours for warm
items to reach the selected temperature.
Padlock icon
The padlock icon shows up when the temperatures
are set up.
The
padlock
compartment's temperatures can or cannot be
modified by the user.
FUNCTIONS
10
+
°C
SETTINGS
5
+
°C
Usually a grey padlock will show open, in
that case you can scroll up or down with a
finger on the display, selecting the desired
temperature
the
desired
Whereas a white closed padlock will be seen if
the user has activated a function that modifies
the settings of the refrigerator and prevents
the user from changing the temperature of the
compartment.
If the icon function is touched and a specific
function is set, the white padlock will be seen
closed and it won't be possible to change the
temperature of the compartments as long as the
function won't be completed or if it is manually
deactivated as long as the function is active.
4.3 Information signals of warning
messages on the display.
open/close
shows
that
the
An integrated control system will give information
through messages you will see on the display.
Serigra a VETRO LCD2.8
There is an alarm tone that occurs with some error
messages which can be turned off by touching
the alarm button
You can find the list of the various messages at
the end of this manual.
and
press
OK
to
confirm.
Testo e gra ca
+4
OFF
+5
+6
°C
+7
OK
Limite per gra ca parti retro-illuminate - la parte bianca è trasparente
+8
+4
OFF
+5
+6
°C
+7
OK
+8
EN
on the main control panel.
00
Funzioni
+
°C
00
+
°C
Impostazioni
00
-
°C
15
Publicidad
