Chauvet Professional ROGUE OUTCAST 2 HYBRID Guía De Referencia Rápida página 3

AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
DMX Linking
The Rogue Outcast 2 Hybrid will work with a DMX controller using a 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The Rogue Outcast 2 Hybrid uses a 5-pin DMX data connection for its DMX personalities: 20CH and 25CH. See the User
Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Rogue Outcast 2 Hybrid supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from
Mounting
Before mounting this product, read the
clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
trusst.com/productcategory/truss-clamps.
Mounting Diagram
Mounting
clamp (2x)
Omega
bracket (2x)
Overhead mounting
Rogue Outcast 2 Hybrid QRG Rev. 2
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Safety Notes. Use at least 2 mounting points per product. Make sure the mounting
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
Safety cable
Surface mounting
EN
Screw Color
Yellow/Brass
Silver
Green
http://
2