Publicidad
Idiomas disponibles
Idiomas disponibles
g)
Do not wear loose clothing or jewellery. Keep hair, clothing and gloves away
from moving parts. Loose clothing, jewellery or long hair can be caught by
moving parts.
h)
The device is not a toy. Children should be supervised to ensure that they do
not play with the device.
2.3.
Safe use of the device
a)
Keep unused devices out of the reach of children and anyone not familiar with
the device or these instructions. Devices are dangerous in the hands of
inexperienced users.
b)
Keep the device in good working order. Before each use, check for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
c)
Keep the device out of the reach of children.
d)
Repair and maintenance of the device should be carried out by qualified
persons using only original spare parts. This will ensure a safe use of the device.
e)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
f)
When transporting and moving the device from the place of storage to the
place of use, follow the health and safety regulations for manual transport that
apply in the country in which the device is used.
g)
Avoid situations where the device stops under heavy load during operation.
This can cause overheating of the drive elements and subsequent damage to
the device.
h)
It is forbidden to move, shift or rotate the device during operation.
i)
Clean the device regularly to prevent the permanent accumulation of dirt.
j)
Do not work with two objects at the same time.
k)
The device is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
l)
It is forbidden to tamper with the device in order to change its parameters or
construction.
m) Keep the device away from sources of fire and heat.
n)
Do not overload the device.
o)
Only attach the device to the engine at the points specified by its manufacturer
and/or using dedicated adapters.
p)
Before attaching the engine and while working on the engine, lock the rotary
mechanism and the castors of the device.
q)
Do not move the loaded stand over any holes, cables, elevations or other
obstacles.
r)
Do not work directly under raised engines.
s)
Ensure that the mounting plate will not rotate before placing the weight.
Publicidad
