Sebson IR OUT G Manual De Instalación página 10

Disable motion detector:
To deactivate the motion detector, switch the connected switch on and off twice within 3 seconds. The motion
detector is now deactivated and the lamp connected, for example, is switched on continuously.
To reactivate the motion detector, switch the connected switch on and off within 0.3 seconds or leave the connected
light switched on for approx. 8 hours. Then the motion detector is activated automatically.
Detection area (Fig 3):
The detection range of the motion detector for ceiling mounting is approx. 10-24m and 360° (free area) at a
mounting height of 2.2-4m at the ceiling. The detection range of the motion detector for wall mounting is approx. 5-
12m and 180° (on free area) with a mounting height of 1.8-2.5m on the wall. In closed rooms the detection distance
can be lower, according to room layout.
Connection of the protective conductor (PE):
Sensitivity when switching (with regard to the ambient brightness):
Time setting (switching off delay):
Reach Setting:
When connecting a lamp with protective conductor contact, the
protective conductor must be bypassed from the supply line to the lamp
with the aid of an additional terminal in the in-wall socket.
This setting control can be used to regulate the switch-on sensitivity of this unit
depending on the ambient brightness (between 0,1 and 2.000LUX).
The duration of the operating time can be set continuously from approx. 10s to
15min. The timer is restarted if a movement from the sensor is detected before the
set time has elapsed.
With this adjustment knob, the detection range can be varied.
10