AEG NSC7G751ES Manual De Instrucciones página 12

12 www.aeg.com
2. Tap
Tap
on or off. The indicator will change to
for the enabled or
disabled sounds.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
Temperature units
Using the Setting mode, you can change
the temperature unit displayed on the
control panel from Celsius to Fahrenheit.
To change the temperature unit:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
and
the unit to select between
Celsius and
5. DAILY USE
5.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
1. Gradually pull the shelf up until it
comes free.
2. Reposition as required.
repeatedly until you see
to switch the sounds either
for the
repeatedly until you see
. Tap the indicator showing
for Fahrenheit.
3. Press and hold the ECO button for
.
approximately 3 seconds to exit the
Setting mode.
Factory settings
This function restores each setting to the
factory default settings. To restore the
factory default settings:
1. Activate the Setting mode (refer to
"Activating the Setting mode").
The display shows
2. Tap
and
see
into solid
.
factory settings are restored.
3. Press and hold the ECO button for
approximately 3 seconds to exit the
Setting mode.
for
5.2 Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the
shelves can be positioned as desired.
repeatedly until you see
. Tap repeatedly until you
.
turns into blinking
, which indicates that
.
and then