Incident illuminator
Pull the lever in R position, in
order to insert the prism for
reflected light. (Fig.36)
Push the main switch to posi-
tion II and use the brightness
adjustment knob to set the
desired level. (Fig.37)
Open/close the field and aper-
ture diaphragms as needed.
(Fig.38)
① Field diaphragm
② Aperture diaphragm
You can center both
diaphragms with the screws
(one on each side). (Fig.39)
In order to perform an incident
polarization analysis, insert
the polarization filter into the
attachment. You can use the
analyzer and Bertrand lens as
described for transmitted light
observation. (Fig.40)
① Polarizer filter
Page 16
②
①
①
Fig.36
Fig.37
Fig.38
Fig.39
Fig.40