Optika Italy B-1000 Serie Manual De Instrucciones página 6

Unpacking
The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.
Assembling
Once you open the box, these are the microscope's components:
⑤
④
①
Put the microscope stand on a
solid table.
First insert the incident po-
larization attachment, using
the 2,5mm Allen wrench to
tighten the screw. All screws
are already inserted into each
threaded hole.
(Fig.1)
Insert the Bertrand lens
attachment, using the 3mm
Allen wrench to tighten the
screw.
(Fig.2)
③
⑦
⑨
Page 6
⑥
① Condenser
② Optical head
③ Main body
④ Eyepieces
⑤ Power supply
⑥ Stage
⑦ Objectives
⑧ Bertrand lens
⑨ Retardation plates
⑩ Polarizer and analyzer
⑪ Polarizing attachment
⑪
⑩
Fig.1
Fig.2
⑧