Laserworld Garden Serie Manual De Usuario página 7

6. Installation and operation
1. Choose a suitable indoor or outdoor location for your laser light effect.
2. Installation:
• Bolt the angle bracket together using the screw included in delivery.
• Screw the angle bracket to the thread on the bottom of the the laser
unit. Make sure to only hand-tighten the angle bracket to not tear out
the thread.
• Screw the stake to the other end of the angle bracket, make sure to
only hand-tighten the stake.
3. Connect the psu adapter to the power cable of the device. Connect the
power adapter to mains.
4. Your laser device starts to project immediately.
5. Disconnect the device from mains to switch off the laser light effect.
7. Remote controller operation
Only available for GS-60G move, GS-200RG move and GS‐250RGB move.
ON / OFF button
Flash increase speed
Rotation increase speed
Color change
Rotation decrease speed
Flash decrease speed
Operation mode
Shutdown timer