Bluefin SUP INFLATABLE PADDLEBOARDS Manual De Instrucciones página 4

I N F L A T I O N
P R O C E S S
WARNING: Please only use the pump provided, or a pump that is recommended for your SUP.
DO NOT use an air compressor as you will risk overinflating the board and damaging it beyond
repair. Your warranty will be void in the event of damage caused by over-inflation.
Unpack and unroll your Bluefin SUP on a smooth, clean, flat surface.
Connect the air tap on your pump to the inflation valve on your SUP. Firmly push the air tap inwards and
twist clockwise to secure the connection. Figure 1
Before you begin to pump, please consult the recommended PSI on the valve(s) of your SUP and inflate to
the appropriate value. DO NOT over-inflate your SUP.
The PSI may not register on your pump until you reach at least 7 PSI - keep pumping!
Once the desired air pressure has been reached, please safely disconnect the air tap of your pump and
secure the valve on your SUP.
3
Figure 1.