APLIC 303183 Manual Del Usuario página 13

Please press and hold the function key (FN), and then press one of the keys given
below to assign the function to a key:
• Q – Android
• W – Windows
• E - iOS
• Y – <
• Shift + Y ->
• ALT + Y – |
5. LED indicator
Glows in blue when the Caps Lock key has been pressed. This display
CAPS
is only available for Windows and iOS.
The LED above the Bluetooth symbol will flash in blue when the key-
board is in pairing mode. The pairing mode is cancelled after 3 min-
utes for security reasons.
Glows in red while the keyboard is charging. The device is fully
Charge charged when the LED goes off. Please recharge the keyboard when
the LED starts flashing in red.
Glows for about 5 seconds in blue when the keyboard is switched
Power
on.
6. Initial use
Remove the Bluetooth keyboard from the packing and charge it fully before using
it for the first time. To do so, connect a microUSB connector of a connection cable
to the Bluetooth keyboard. Then, connect the USB connector to a suitable charging
source (e.g., computer or USB charging adapter). The red "Charge" LED glows when
the battery is charging. Disconnect the Bluetooth keyboard from its power source
after charging it each time to prevent constant recharging. It is advisable to use the
device regularly to maintain the full capacity of the batteries.
English
13