Husqvarna FS 300 Serie Manual De Usuario página 14

To stop the operation
1. Turn the cutting depth wheel (K) clockwise to fully lift
the cutting blade.
2. Stop the water supply (G).
To stop the product
WARNING:
push the machine stop button to stop the
product quickly.
WARNING:
for a while after the engine stops.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
For all servicing and repair work on the product, special
training is necessary. We guarantee that professional
repairs and servicing is available. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
For spare parts, speak to your Husqvarna dealer or
service agent.
To do before the maintenance
• Park the product on a level surface and stop the
engine. Turn the engine ON/OFF switch to the
OFF position to prevent accidental start during
maintenance.
14
If there is an emergency,
The cutting blade rotates
Maintenance
Read and understand the
• Turn the engine ON/OFF switch to the OFF position.
Refer to the operator's manual supplied by the
engine manufacturer.
To operate the product
1. Slowly turn the cutting depth wheel counterclockwise
to lower the cutting blade.
2. Make a cut as a guide, approximately 20-30 mm.
3. Do cut increments of 50 mm until you get the
necessary depth. Push the lever up to lock the
cutting depth wheel.
4. Adjust the water supply when you operate the
product. Turn the water tap to adjust the water
supply.
CAUTION:
blade must have sufficient supply of
water to cool down the cutting blade.
The water also prevents dust buildup.
5. Cut only in a line, align the cutting blade with the
marks.
6. Slowly push the product forward and make sure that
the pointer and the cutting blade are aligned with the
marks.
CAUTION:
move the product from side to side while
the cutting blade rotates.
• Clean the area around the product from oil and dirt.
Remove unwanted objects.
• Put clear signs around the maintenance area to give
a warning to bystanders that maintenance work is in
progress.
• Keep fire extinguishers, medical supplies and an
emergency phone near.
Maintenance schedule
For maintenace of the engine and engine parts, refer
to the operator's manual supplied by the engine
manufacturer.
Each side of the cutting
Do not turn, rotate or
1919 - 002 - 23.01.2023