Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Clean the external surfaces of the product with water. Refer to
page 15 .
Clean the air filter. In dusty environments, clean the air filter more frequently. Refer to
clean and replace the air filter on page 16 .
Do a general inspection. Refer to
Do a check of the engine oil level.
Do a check of the drive belt. If it is necessary, adjust the tension of the drive belt. Refer to
To adjust the tension of the drive belt on page 15 .
Do a check of the machine stop button. Refer to
on page 7 .
Do a check of the blade guards. Refer to
Do a check of the muffler.
Do a check of the cutting blade. Refer to
Lubricate the grease nipples for the cutting depth adjustment. Refer to
product on page 16 .
Do a check of the water flow. If the water flow is not sufficient, do a check of the water
supply holes in the blade guard. Remove unwanted material that causes a blockage to
the water supply holes.
To clean the product
WARNING:
When you clean the product, dirt and
harmful material can eject from the product.
CAUTION:
decreases the performance of the product
and can cause the engine to become too
hot.
•
Let the product become cool before you clean it.
•
Do not clean electrical components with water.
•
Use a weak cleaning agent. Put on protective gloves
to prevent skin irritation.
•
Always clean all the equipment at the end of the
work day. Do not use a high-pressure washer to
clean the product.
•
Remove blockage from all air openings.
•
Clean all outlets, connections and cables with a dry
cloth.
•
Remove unwanted material that causes a blockage
to the water supply holes in the blade guard.
•
Clean around the fuel tank cap.
To do a general inspection
•
Make sure that the nuts and screws on the product
are tightened.
1919 - 002 - 23.01.2023
To do a general inspection on page 15 .
To do a check of the machine stop button
To do a check of the blade guard on page 8 .
To clean the product on page 15 .
Use protective glasses.
A blocked air intake
To clean the product on
To lubricate the
•
Make sure that the cables on the product are not in a
position where they can become damaged.
•
Make sure that there are no fuel or oil leaks.
•
Make sure that the seals for the fuel tank cap are not
damaged.
•
Examine the fuel hose. Replace the fuel hose if it is
damaged or worn.
•
Examine the water hoses for leakage. Do not
operate a product that has damaged water hoses.
To adjust the tension of the drive belt
1. Loosen the 2 nuts (S) and remove the drive belt
cover.
2. Make sure that the drive belt is not damaged.
Daily
Weekly
X
To
X
X
X
X
X
X
X
X
X
X
15
Publicidad
