Publicidad
Idiomas disponibles
Idiomas disponibles
• Always use appropriate personal pro-
tective equipment when handling and
using equipment in drains. Wear ap-
propriate protective equipment such as
latex or rubber gloves, goggles, face
shields, and respirators when inspect-
ing drains that might contain hazard-
ous chemicals or bacteria. Always wear
eye protection to protect against dirt and
other foreign objects.
Operating Instructions
Placement
Set up your Mini Pro near the pipe entrance
so you can manipulate the push cable while
viewing the monitor. Make sure that the
drum can spin freely. Placing the reel where
the drum cannot spin freely may result in
over-winding the cable, which may result in
property damage and/or serious injury.
Lay the Mini Pro on its back for greater sta-
bility, particularly when on a rooftop, over-
head entry, or hillside.
10 – English – Mini Pro
Inspection Overview
To perform a pipe inspection, connect any
See Snake monitor to the reel, power on the
system, push the push cable through the
pipe, and observe the display.
For advanced inspection options, such as
capturing media, locating the sonde, tracing
the push cable, and delivering reports, refer
to the manual that comes with your monitor.
Connecting to the Monitor
Connect the system cable to the monitor by
aligning the connector guide pin with the
socket and pushing the connector straight
in.
Only twist the outer lock-
NOTICE
ing sleeve. Never bend or
twist the connector.
Socket
Guide Pin
Outer Locking Sleeve
Retrieving the Camera
Pull the push cable back out of the pipe with
slow, steady force and feed small lengths
back into the drum. Wipe the push cable
with a paper towel or rag as you retrieve it.
Do not exert excessive
NOTICE
force or pull at sharp an-
gles.
lengths or forcing the push
cable may cause it to loop,
kink, or break.
Connector Ridge
Feeding
longer
Publicidad
