Filling With Water - Dupray neat Manual De Instrucciones

REFILLING DURING/AFTER USE
Important: To avoid burns from escaping steam
Press and hold the steam trigger
to release all the remaining steam.
6

FILLING WITH WATER

when removing the boiler cap:
4
Repeat steps for filling with water.
Unscrew and remove the boiler cap
Pour water in the boiler until it's full.
Max: 40 oz. (1200 ml)
Never put anything else than clean water
in the boiler.
Tips: • Using demineralized water prevents mineral
build up and prolongs the life of the unit.
• Hold the steam trigger during refills
to make it faster.
Put the boiler cap
Allow 20 minutes for the
unit to cool down.
back on tightly.
10
.
10