CycloVac HD Serie Manual De Instrucciones página 16

Troubleshooting
ProbleM
system will not start
system will not stop
If in spite of these suggestions, your system is still not stopping,
16
PossIble cause
faulty vacuum inlet
Defective on/off hose
If none of these suggestions help start your system,
contact your authorized service center.
Hose improperly inserted
into vacuum inlet
Defective on/off hose
contact your authorized service center.
troubleshooting
correctIve actIon
Start the vacuum system
from other inlets in your
home, to identify the
defective inlet.
turn the hose 1/4 turn in
the vacuum inlet. If unit
starts, have the vacuum
hose checked by a
certified service center.
ensure that the hose
end is properly placed
in the vacuum inlet: the
tab on the hose should
fit into the slots of the
inlet, to ensure adequate
contacts for the hose
switch to function.
If the hose is properly
placed in the vacuum
inlet, and the unit
continues running
despite the fact that
the hose switch is in
the "off" position, have
the hose checked by a
service center.