Festool CTH 26 E/a Manual De Instrucciones página 20

English
4 Intended use
The mobile dust extractor is designed for ex­
tracting hazardous dust with limit values corre­
sponding to dust class 'H' in accordance with
EN 60335-2-69, including wood and paint dust.
The mobile dust extractor is suitable for ex­
tracting dust containing carcinogenic and
pathogenic particles as well as asbestos dust.
The mobile dust extractor is suitable for heavy-
duty applications and industrial use in accord­
ance with EN 60335-1 and EN 60335-2-69.
The user is liable for improper or non-in­
tended use.
5 Machine features
The specified illustrations appear at the begin­
ning of the Operating Instructions.
[1-1]
Sealing plug
[1-2] Intake opening
[1-3]
Module slot
[1-5] Appliance socket
[1-4]
Hose store
[1-6] Handle
[1-7] SysDoc
[1-8]
Hose diameter setting
[1-9] Suction power adjuster
[1-10]
Switch
[1-11] Warning sticker
[1-12]
Locking clip
[1-13] Dust container
[1-15] Brake
6 Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
► The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
20
6.1 Initial commissioning
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the accessories from the dirt
trap [2-3] and the packaging!
► Cover the text field of the warning
sign [1-11] with the supplied adhesive label
in your country's language.
► Insert the plug [1-1] at the cover plate (see
figure [1a]).
► Place a filter bag or safety filter bag in the
dirt trap in line with legal requirements (see
section 7.8, 7.9).
► Replace the top section [2-1] and close the
locking clips [2-2].
► Attach the cord holder to the reverse of the
mobile dust extractor (see figure [3]).
► Connect the suction hose to the machine.
6.2 Switching on/off
► Insert the mains plug into an earthed sock­
et.
WARNING
Risk of injury from tools starting up unex­
pectedly
► Before setting the switch to the "AUTO" or
"MAN" position, make sure that the con­
nected tool is switched off.
The switch [1-10] serves as an on/off switch.
"0" switch position
Appliance socket [1-4] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-4] is connected to the pow­
er, the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-4] is connected to the pow­
er, the mobile dust extractor starts when the
connected tool is switched on.
7 Settings
7.1 Adjusting the hose diameter
► Adjust the hose diameter adjuster [1-8] to
match the diameter of the connected hose.
This ensures that the air speed in the ex­
tractor hose is measured correctly (see
section "Volumetric flow monitoring").