Lindy 38365 Manual De Usuario página 5

User Manual
Specification
HDMI 2.0b, 18Gbps Compliant

HDCP 2.2/1.4 Pass-through

Transmission distance (point-to-point): 100m via Cat.6A or above, 50m (164.04ft) via Cat6

Network Video Bandwidth: 10G

PoE Standard: 802.3at

ESD Protection: ± 8kV (air-gap discharge)

Human Body Model: ± 4kV (contact discharge)

Operating Temperature: 0°C - 40°C (32°F - 104°F)

Storage Temperature: -20°C - 60°C (-4°F - 140°F)

Relative Humidity: 20 - 90% RH (Non-condensing)

Metal Housing

Colour: Black

Power Requirements: AC100-240V 50/60Hz

Power Consumption: 13.5W

Installation
Front
1. RESET Button: Press and hold this button for 5 seconds when the unit is powered-on to restore the
default settings.
2. POWER LED: Indicates power.
3. STATUS LED: This will illuminate green when the system is running normally, will flash or remain off
if there is an hardware error.
4. LINK LED: This will illuminate green when a 10G network device is connected to the unit.
5. VIDEO LED: This will illuminate green when video input is detected (ENC mode) or when HDMI OUT
is sending a video signal (DEC mode).
6. USB LED: This will flash when USB devices are connected.
7. ENC LED: This will illuminate green when the unit is in ENC mode.
8. DEC LED: This will illuminate green when the unit is in DEC mode.
9. MODE Button: Press and hold this button for 5 seconds to switch between ENC or DEC mode.
10. USB DEVICES: Connect to a mouse, keyboard or other USB devices when the unit is in DEC mode.
11. USB HOST: Connect to a Computer when the unit is in ENC mode.
English