Lindy 38365 Manual De Usuario página 7

User Manual
Web GUI
This transceiver supports playing Secondary Stream on computer through an available software such as
VLC media player, simultaneously it can be managed via the built-in Web GUI to configure the
Secondary Stream.
Please follow the below steps:
1. Connect the transceiver (in Encoder mode) with a PC, an HDMI source device and the power
supply as shown below:
2. Set the PC's IP address to 169.254.100.100 and the Subnet mask to 255.255.0.0.
3. Install a bonjour protocol checking tool (such as zeroconfServiceBrowser) on the PC to find the
IP address of the Encoder. After opening the software, you can select "Workgroup Manager" in
Services of Browser, select the Host name in Service-Instances, and find the IP address in the
Address item in of Instance-Info.
English