Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION:
MOBILE INSTALLATION:
The radio may be installed in any position into vehicle, where the controls and
microphone
accessible
and
interfere with the vehicle safe
operation. If your vehicle is
equipped with airbags, be
sure that the radio does not
interfere with its deployment.
If you uncertain about install
the radio, contact your vehicle
dealer or distributor.
1. Install the mounting bracket into vehicle.
2. Positioning the radio, fixing with the supplied screws.
● Double check that all screws are tightened to prevent vehicle vibration from
loosening the radio.
Note:
- Use only the provided screws, otherwise you risk damaging the circuit
board, components or falloff of the unit.
DC POWER CABLE CONNECTION:
■ Mobile installation:
Check that the battery voltage is the same as that required by the radio. Be sure
to use a battery that supplies sufficient current to operate the radio. If the current
is insufficient, the transmitting output power may drop excessively.
Never remove the fuse holder from the DC power cable.
Note:
- If you use the radio for a long time when the vehicle battery is not fully
charged, or when the engine is OFF, the battery may become discharged,
and will not have sufficient charge to start the vehicle. Avoid using the
radio in these conditions.
are
easily
does
not
English - 25 -
Publicidad
Tabla de contenido
