Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
1/2" DR socket
connect to anvil.
Please use torque open wrench to
adjust the torque:
- With anticlockwise - torque will be
increased.
- With clockwise - torque will be
reduced.
1. Air tools are adversely affected by moisture. Since air from compressor contains much
moisture and dust, it is desirable to provide a filter in the pipeline to remove such undesirable
elements. Also take the drain out from air tank every day.
2. When using brand-new air hose or air pipe, blow and clean the air hose or pipe inside before
installation.
3. Keep air hose or air pipe inside clean to prevent airdrop problem caused by lots of drain and
dust accumulated, either to avoid possibly inside diameter smaller problem after long term
usage.
4. When disconnect air hose from air tool during operation, do not drop air hose end to the floor
as dust or other element may get into air hose.
5. Use air regulator to keep stable air pressure at 6.0kgf-cm² (80~90 psi) at the toll. It is
important to get proper air pressure at the toll.
6. With high quality Oil-free motor, any moisture or lubrication injection may damage the air
screwdriver, please keep tool dry and avoid oil based substances exposing to the products.
For avoiding moisture affection, using Air Dryer is necessary in wet area or under moist
weather.
8
INSTRUCTIONS
Two hand to use
the tool.
Adjust switch for
forward or reverse.
AIR SUPLLY
Press de trigger for
running.
Connect fitting
with the air hose
Rear exhaust.
Please add lubricant
1~2 drops weekly
(168h)
Publicidad
