Publicidad
Idiomas disponibles
Idiomas disponibles
EN
4. Assembly
1. Open the kickstand.
3. Install the handlebars onto the stem, making sure to
install the handlebar in the correct direction.
Safety tips: Before each ride, please check to ensure that the screws, folding safety lock, and other linkage parts and
components are not loose.
10
2. Lift the stem up completely until it is in an upright and
locked position. Lift the folding safety lock, and push the
quick release lever inward to its end.
4. Pre-tighten all six screws using the included wrench.
Make sure the handlebar is correctly installed before
tightening the screws thoroughly.
Publicidad
