Hobby Biotherm II Manual De Instrucciones página 6

7.6 Temperatureinheit einstellen:
Es kann zwischen Fahrenheit oder Celsius als Anzeigetemperatur gewählt werden. Einstellen der Temperatureinheit: Um die „Temperatureinheit" zu programmieren, berühren Sie
die Taste , ca. 3 Sekunden lang. Berühren Sie nun 1 x die
Tasten ein. Berühren Sie die Taste
8. Reinigung & Wartung:
Hinweis:
angefeuchtetes Tuch. Verwenden Sie KEINE scharfen Reinigungs- oder Lösungsmittel.
9. Problembehandlung:
Memory Funktion: Der Biotherm II ist gegen Datenverlust bei Stromausfall mit einer Memory Funktion ausgestattet. Der Biotherm II hält so die
programmierten Werte für Temperatur und Zeit dauerhaft über zwei Jahre. Hinweis: Die aktuelle Uhrzeit geht bei Stromausfall verloren und muss nachgestellt werden.
Fehler Mögliche Ursache
Displayanzeige „---„ Kabelbruch Temperatursensor
Displayanzeige „HH" Temperatur oberhalb der Anzeigengrenze von + 90,0° C
Displayanzeige „LL" Temperatur unterhalb der Anzeigengrenze von - 30,0° C
10. Garantiebedingungen:
Dohse Aquaristik GmbH & Co. KG gewährt eine Garantiezeit von 24 Monaten ab Kaufdatum. Im Garantie- oder Reparaturfall senden Sie bitte das Gerät an den Händler zurück,
bei dem Sie es erworben haben. Die Garantiekarte mit den Garantiebedingungen finden Sie im Bereich Service auf unserer Homepage: www.hobby-terraristik.com
11. Konformitätserklärung:
Die Konformitätserklärung finden Sie auf unserer Homepage: www.hobby-terraristik.com. Geben Sie die Art.-Nr.: 10882 im Suchfeld ein.
12. Technische Daten:
Betriebsspannung: 100 – 240 V ~ 50 / 60 Hz
Anschlussleistung je Schaltplatz: max. 600 W (Ohmsche Belastung)
Anschlussleistung gesamt der Schaltplatzleiste:
max. 1.200 W (Ohmsche Belastung)
Temperatur Anzeigebereich: - 30° C bis + 90° C
Temperatur Regelbereich: 0,0° C bis + 60° C
Biotherm II
1. Introduction:
Thank you for purchasing the Biotherm II digital temperature controller. The Biotherm II is a reliable digital temperature controller for terraria. The innovative measuring and con-
trol device allows temperature and cooling to be controlled separately. Temperature control is possible in steps of 0.1° C. The time control switches at one-second intervals. It is configurable
for visual and audible alarm. The display shows all set and actual values, is illuminated and has an LED activity indicator. The waterproof temperature sensor is equipped with a Quick -
Connect - connector and thus ensures easy installation of the sensor. A regulator unit with two slots for the operation of a heater and a cooler is also included and has two high-performance
relays. It is fitted with a smart chip which guarantees stable temperature control. The Biotherm II is suitable for versatile applications where constant temperature control is required. It is
used in terraria, aquaria, paludaria as well as in greenhouses or aviaries. Read the user manual carefully and follow the instructions before using this product. These operating instructions
are a component part of the product. It contains important information on commissioning, safety and operation! Keep this operating manual for future reference!
2. Contents of delivery:
∙ illuminated display with LED activity indicator
∙ waterproof temperature sensor with Quick - Connect - Connector
∙ regulator unit with two plug sockets
3. Important safety instructions:
WARNING: Basic safety precautions should be observed when handling this equipment to prevent injury, including the following advice:
Read and follow all safety instructions before and during the use of the device. Observe all important operating instructions and information when using the device.
Otherwise the product may be damaged or injuries occur.
DANGER: Special care should be taken to avoid possible electric shock when water is used in the operation of this appliance You should not attempt to repair the unit yourself, but return it
to an authorised service centre for repair or dispose of the unit. Do not use a device with a damaged power cable or if it does not work properly, has been dropped or otherwise damaged.
Drip loop: Make a so-called 'drip loop' (see illustration
This should be in the direction of the socket with each power cable. The ‚'drip loop' is the part of the power cord that is below the power outlet or connection
when an extension cord is used. This prevents water from running along the cable and coming into contact with the socket. Should the plug or plug socket get
wet, do NOT pull the plug. Switch off the fuse or circuit breaker for the device. Only then should you pull out the power cable and check the plug socket for
water.
Prevent injuries: Do not touch moving or hot parts to prevent personal injury.
Caution: Always separate the device from the power supply before you handle it, insert or remove parts or before devices are installed or maintained. Never pull
the power cable to pull the adapter out of the socket. Always hold and pull the plug connector. Always disconnect devices that are not in use from the power supply.
Never pick up the unit by the power cable.
Operating limitations: The device is not suitable for use by persons (including children) with reduced physical, sensory or mental abilities or by persons with little experience in handling
technical devices, unless these persons receive appropriate operating instructions before using the device or they are under the supervision of a person responsible for their safety. Children
should always be supervised to ensure that they do not play with the device.
Intended use: Use this device only for its intended purpose. The use of attachments not recommended or sold by the device manufacturer may lead to unsafe operating conditions.
Installation: Do not install or store the device where it is exposed to temperatures below freezing. Do not expose the unit to direct sunlight. Regularly check the device. Do not leave the
device unattended for a long period of time. Should an extension cable be required, ensure that the connection is water and dust proof. Only use a cable with a suitable power output. An
extension cord with lower amperage or wattage than the unit may overheat. Take care to route the extension cable so that you do not trip over it or pull it out. This appliance is intended
for household use only and not for commercial purposes.
6
Tel.: +49 (0) 22 25 - 94 15 0 · Fax: +49 (0) 22 25 - 94 64 94 · info@dohse-aquaristik.de · www.hobby-terraristik.com
. Das „CF" Symbol blinkt. Berühren Sie erneut die Taste
für 3 Sekunden, um die „Temperatureinheit" zu speichern.
Bei Wartungs- und Reinigungsarbeiten unbedingt das Gerät vom Netz trennen! Zur Reinigung verwenden Sie ein faserfreies, mit Wasser leicht
):
Lösung
Sensor austauschen (Art.-Nr.: 10883)
Prüfen und verändern Sie die Position des Fühlers.
Prüfen und verändern Sie die Position des Fühlers.
Temperatur Alarmbereich: 0.0° C bis + 15° C
Temperatur Anzeigegenauigkeit: + 0,1° C
Temperatur Regelgenauigkeit: + 0,1° C
Länge Anschlusskabel: 1,4 m
Länge Sensorkabel: 1,8 m
Länge Kabel Bedienteil-Regelleiste: 1,5 m
∙ operating instructions
∙ assembly implements
. Stellen Sie die gewünschte „Temperatureinheit" mit den
Alle Angaben sind Circa
Angaben.
Technische Änderungen
bleiben vorbehalten.