sunjoe SPX-CCK Manual De Instrucciones página 2

Wheel + Rim Brush Assembly
Most SPX3000 + SPX4000 Series
Trigger gun
FOR USE WITH SPX3000/SPX4000 Series:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the wheel + rim brush and align the two tabs of the locking collar with the transfer adapter.
4. Once aligned, insert the tip of the locking collar into the transfer adapter and twist counterclockwise to lock
into place.
5. Adjust the wheel + rim brush if needed. After any adjustment is made, use the locking collar to lock the
attachment into place and twist to lock.
Most SPX2000 Series + SPX4003-ELT, SPX7001E
Trigger gun
FOR USE WITH MOST SPX2000 SERIES + SPX4003-ELT, SPX7001E:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the wheel + rim brush and align the two tabs of the locking collar with the inside of the trigger gun.
3. Once aligned, insert the tip of the locking collar into the trigger gun and twist counterclockwise to lock into
place.
4. Adjust the wheel + rim brush if needed. After any adjustment is made, use the locking collar to lock the
attachment into place.
Trigger gun
Pistola
Pistolet
Transfer Locking
adapter collar
Locking
collar
2
Wheel + rim brush
Wheel + rim brush