sunjoe SPX-CCK Manual De Instrucciones página 3

Some SPX2000 Series + SPX4003, SPX4003-ULT
Trigger gun
FOR USE WITH SOME SPX2000 SERIES + SPX4003, SPX4003-ULT:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the wheel + rim brush and align the two tabs of the locking collar with the inside of the trigger gun.
3. Once aligned, insert the tip of the locking collar into the trigger gun and twist counterclockwise to lock into
place.
4. Adjust the wheel + rim brush if needed. After any adjustment is made, use the locking collar to lock the
attachment into place.
SPX200 + SPX1000 Series
Trigger gun
FOR USE WITH SPX200/SPX1000 Series:
1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Take the wheel + rim brush and align the two tabs of the locking collar with the middle wand.
3. Once aligned, push the tip of the locking collar into the middle wand and twist counterclockwise to lock into
place.
4. Adjust the wheel + rim brush if needed. After any adjustment is made, use the locking collar to lock the
attachment into place and twist to lock.
Middle wand
3
Locking
collar Wheel + rim brush
Locking
collar Wheel + rim brush