Ametek CREAFORM peel 3 Manual Del Usuario página 16

1. Plug the power supply cable into an electric source.
2. Connect the power supply cable to the USB 3.0 cable.
3. Connect the USB 3.0 cable to the computer.
4. Connect the other extremity of the USB 3.0 cable to the scanner.
5. Connect the power cable to the scanner.
To disconnect the scanner
1. Unplug the power and the USB cables from the scanner.
2. Disconnect remaining cables as desired afterwards.
peel 3 User Manual version p3d-2203-001 (last update: 2022-09-13)
Page 15 of 23