GET RX1 PRO Guia De Instalacion página 3

SPECIFIC WARNINGS
ATTENTION: GET RX1 PRO ECU DOES NOT CONTROL
THE MOTORBIKE'S ORIGINAL INSTRUMENT PANEL.
Once the control unit has been installed, an error
message will appear on the instrument panel: this
does not have any effect on how the motorbike and/
or control unit operates. The instrument panel can
be uninstalled without affecting the operating of the
vehicle or GET RX1 Pro control unit.
If you uninstall the instrument panel, we recommend
protecting the instrument panel wiring harness with
the protective cap supplied the GET kit to prevent it
from being damaged.
1. Always make sure that RX1 PRO ECU is properly installed and
functional prior to use.
2. Never expose the device to temperatures above 70°C /158°F.
3. Install it when the engine is cold.
4. RX1 PRO ECU may not work properly if the OEM TPS sensor
is damaged or modified.
5. To use and manage the GPA technology, it is necessary to install
GET GPA Switch or GET LC-GPA module (both sold separately), or
manage it with GET Maya Software (sold separately).
6. To change RX1 Pro injection map, it is necessary to use GET
Maya programming software (sold separately).
7. If the bike does not start or the engine is irregular, be sure
that the RX1 Pro ECU chosen is compatible with your bike
model and year, verify that the ECU is connected properly, and
always perform a TPS calibration.
8. For Yamaha WR 250 F 2022 and Yamaha WR 450 F 2022, the
OEM map switch button will not work when the RX1 Pro ECU is
installed. It is necessary to remove the original map switch and
cover the connectors as described next.
3
EN